Contiki-NG
arch
platform
cc26x0-cc13x0
launchpad
cc1350
board.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/** \addtogroup launchpad-peripherals
32
* @{
33
*
34
* \defgroup launchpad-cc1350-specific CC1350 LaunchPad Peripherals
35
*
36
* Defines related to the CC1350 LaunchPad
37
*
38
* This file provides connectivity information on LEDs, Buttons, UART and
39
* other peripherals
40
*
41
* This file is not meant to be modified by the user.
42
* @{
43
*
44
* \file
45
* Header file with definitions related to the I/O connections on the TI
46
* CC1350 LaunchPad
47
*
48
* \note Do not include this file directly. It gets included by contiki-conf
49
* after all relevant directives have been set.
50
*/
51
/*---------------------------------------------------------------------------*/
52
#ifndef BOARD_H_
53
#define BOARD_H_
54
/*---------------------------------------------------------------------------*/
55
#include "
ioc.h
"
56
/*---------------------------------------------------------------------------*/
57
/**
58
* \name LED HAL configuration
59
*
60
* Those values are not meant to be modified by the user
61
* @{
62
*/
63
#define LEDS_CONF_COUNT 2
64
#define LEDS_CONF_RED 1
65
#define LEDS_CONF_GREEN 2
66
/** @} */
67
/*---------------------------------------------------------------------------*/
68
/**
69
* \name LED IOID mappings
70
*
71
* Those values are not meant to be modified by the user
72
* @{
73
*/
74
#define BOARD_IOID_LED_1 IOID_6
75
#define BOARD_IOID_LED_2 IOID_7
76
/** @} */
77
/*---------------------------------------------------------------------------*/
78
/**
79
* \name UART IOID mapping
80
*
81
* Those values are not meant to be modified by the user
82
* @{
83
*/
84
#define BOARD_IOID_UART_RX IOID_2
85
#define BOARD_IOID_UART_TX IOID_3
86
#define BOARD_IOID_UART_RTS IOID_18
87
#define BOARD_IOID_UART_CTS IOID_19
88
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
89
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
90
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
91
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
92
/** @} */
93
/*---------------------------------------------------------------------------*/
94
/**
95
* \name Button IOID mapping
96
*
97
* Those values are not meant to be modified by the user
98
* @{
99
*/
100
#define BOARD_IOID_KEY_LEFT IOID_13
101
#define BOARD_IOID_KEY_RIGHT IOID_14
102
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
103
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
104
/** @} */
105
/*---------------------------------------------------------------------------*/
106
/**
107
* \name External flash IOID mapping
108
*
109
* Those values are not meant to be modified by the user
110
* @{
111
*/
112
#define EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0
113
114
#define EXT_FLASH_SPI_PIN_SCK IOID_10
115
#define EXT_FLASH_SPI_PIN_MOSI IOID_9
116
#define EXT_FLASH_SPI_PIN_MISO IOID_8
117
#define EXT_FLASH_SPI_PIN_CS IOID_20
118
119
#define EXT_FLASH_DEVICE_ID 0x14
120
#define EXT_FLASH_MID 0xC2
121
122
#define EXT_FLASH_PROGRAM_PAGE_SIZE 256
123
#define EXT_FLASH_ERASE_SECTOR_SIZE 4096
124
/*---------------------------------------------------------------------------*/
125
/**
126
* \brief I2C IOID mappings
127
*
128
* Those values are not meant to be modified by the user
129
* @{
130
*/
131
#define BOARD_IOID_SCL IOID_4
132
#define BOARD_IOID_SDA IOID_5
133
/** @} */
134
/*---------------------------------------------------------------------------*/
135
/**
136
* \brief CC1350LP RF Switch
137
*
138
* Those values are not meant to be modified by the user
139
* @{
140
*/
141
#define RF_SWITCH_CONF_ENABLE 1
142
/** @} */
143
/*---------------------------------------------------------------------------*/
144
/**
145
* \brief TX power settings
146
*
147
* Those values are not meant to be modified by the user
148
* @{
149
*/
150
#define PROP_MODE_CONF_TX_POWER_779_930 tx_power_driver_779_930
151
/** @} */
152
/*---------------------------------------------------------------------------*/
153
/**
154
* \brief ROM bootloader configuration
155
*
156
* Change CCXXWARE_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which
157
* button triggers the bootloader on reset. Use CCXXWARE_CONF_BL_LEVEL to
158
* control the pin level that enables the bootloader (0: low, 1: high). It is
159
* also possible to use any other externally-controlled DIO.
160
* @{
161
*/
162
#define CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT
163
#define CCXXWARE_CONF_BL_LEVEL 0
164
/** @} */
165
/*---------------------------------------------------------------------------*/
166
/**
167
* \brief Remaining pins
168
*
169
* Those values are not meant to be modified by the user
170
* @{
171
*/
172
#define BOARD_IOID_CS IOID_11
173
#define BOARD_IOID_TDO IOID_16
174
#define BOARD_IOID_TDI IOID_17
175
#define BOARD_IOID_DIO12 IOID_12
176
#define BOARD_IOID_DIO15 IOID_15
177
#define BOARD_IOID_DIO21 IOID_21
178
#define BOARD_IOID_DIO22 IOID_22
179
#define BOARD_IOID_DIO23 IOID_23
180
#define BOARD_IOID_DIO24 IOID_24
181
#define BOARD_IOID_DIO25 IOID_25
182
#define BOARD_IOID_DIO26 IOID_26
183
#define BOARD_IOID_DIO27 IOID_27
184
#define BOARD_IOID_DIO28 IOID_28
185
#define BOARD_IOID_DIO29 IOID_29
186
#define BOARD_IOID_DIO30 IOID_30
187
188
#define BOARD_UNUSED_PINS { \
189
BOARD_IOID_CS, BOARD_IOID_TDO, BOARD_IOID_TDI, BOARD_IOID_DIO12, \
190
BOARD_IOID_DIO15, BOARD_IOID_DIO21, BOARD_IOID_DIO22, BOARD_IOID_DIO23, \
191
BOARD_IOID_DIO24, BOARD_IOID_DIO25, BOARD_IOID_DIO26, BOARD_IOID_DIO27, \
192
BOARD_IOID_DIO28, BOARD_IOID_DIO29, \
193
IOID_UNUSED \
194
}
195
/** @} */
196
/*---------------------------------------------------------------------------*/
197
/**
198
* \brief Board indices for the button HAL
199
*
200
* Those values are not meant to be modified by the user
201
* @{
202
*/
203
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
204
#define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
205
/** @} */
206
/*---------------------------------------------------------------------------*/
207
/**
208
* \name Device string used on startup
209
* @{
210
*/
211
#define BOARD_STRING "TI CC1350 LaunchPad"
212
/** @} */
213
/*---------------------------------------------------------------------------*/
214
#endif
/* BOARD_H_ */
215
/*---------------------------------------------------------------------------*/
216
/**
217
* @}
218
* @}
219
*/
ioc.h
Header file with declarations for the I/O Control module.
Generated on Sat May 30 2020 17:03:56 for Contiki-NG by
1.8.13