Contiki-NG
arch
platform
srf06-cc26xx
sensortag
bmp-280-sensor.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/**
32
* \addtogroup sensortag-cc26xx-peripherals
33
* @{
34
*
35
* \defgroup sensortag-cc26xx-bmp-sensor SensorTag 2.0 Pressure Sensor
36
*
37
* Due to the time required for the sensor to startup, this driver is meant to
38
* be used in an asynchronous fashion. The caller must first activate the
39
* sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
40
* sequence, but the call will not wait for it to complete so that the CPU can
41
* perform other tasks or drop to a low power mode.
42
*
43
* Once the sensor is stable, the driver will generate a sensors_changed event.
44
*
45
* We take readings in "Forced" mode. In this mode, the BMP will take a single
46
* measurement and it will then automatically go to sleep.
47
*
48
* SENSORS_ACTIVATE must be called again to trigger a new reading cycle
49
* @{
50
*
51
* \file
52
* Header file for the Sensortag BMP280 Altimeter / Pressure Sensor
53
*/
54
/*---------------------------------------------------------------------------*/
55
#ifndef BMP_280_SENSOR_H_
56
#define BMP_280_SENSOR_H_
57
/*---------------------------------------------------------------------------*/
58
#define BMP_280_SENSOR_TYPE_TEMP 1
59
#define BMP_280_SENSOR_TYPE_PRESS 2
60
/*---------------------------------------------------------------------------*/
61
extern
const
struct
sensors_sensor
bmp_280_sensor
;
62
/*---------------------------------------------------------------------------*/
63
#endif
/* BMP_280_SENSOR_H_ */
64
/*---------------------------------------------------------------------------*/
65
/**
66
* @}
67
* @}
68
*/
bmp_280_sensor
const struct sensors_sensor bmp_280_sensor
Exports a global symbol to be used by the sensor API.
Definition:
sensortag-sensors.c:48
Generated on Sat May 30 2020 17:57:35 for Contiki-NG by
1.8.13