Contiki-NG
arch
platform
srf06-cc26xx
launchpad
cc2640r2
board.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/** \addtogroup launchpad-peripherals
32
* @{
33
*
34
* \defgroup launchpad-cc2640r2-specific CC2640R2 LaunchPad Peripherals
35
*
36
* Defines related to the CC2640R2 LaunchPad
37
*
38
* This file provides connectivity information on LEDs, Buttons, UART and
39
* other peripherals
40
*
41
* This file is not meant to be modified by the user.
42
* @{
43
*
44
* \file
45
* Header file with definitions related to the I/O connections on the TI
46
* CC2640R2 LaunchPad
47
*
48
* \note Do not include this file directly. It gets included by contiki-conf
49
* after all relevant directives have been set.
50
*/
51
/*---------------------------------------------------------------------------*/
52
#ifndef BOARD_H_
53
#define BOARD_H_
54
/*---------------------------------------------------------------------------*/
55
#include "
ioc.h
"
56
/*---------------------------------------------------------------------------*/
57
/**
58
* \name LED HAL configuration
59
*
60
* Those values are not meant to be modified by the user
61
* @{
62
*/
63
#define LEDS_CONF_COUNT 2
64
#define LEDS_CONF_RED 1
65
#define LEDS_CONF_GREEN 2
66
/** @} */
67
/*---------------------------------------------------------------------------*/
68
/**
69
* \name LED IOID mappings
70
*
71
* Those values are not meant to be modified by the user
72
* @{
73
*/
74
#define BOARD_IOID_LED_1 IOID_6
75
#define BOARD_IOID_LED_2 IOID_7
76
/** @} */
77
/*---------------------------------------------------------------------------*/
78
/**
79
* \name UART IOID mapping
80
*
81
* Those values are not meant to be modified by the user
82
* @{
83
*/
84
#define BOARD_IOID_UART_RX IOID_2
85
#define BOARD_IOID_UART_TX IOID_3
86
#define BOARD_IOID_UART_RTS IOID_18
87
#define BOARD_IOID_UART_CTS IOID_19
88
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
89
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
90
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
91
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
92
/** @} */
93
/*---------------------------------------------------------------------------*/
94
/**
95
* \name Button IOID mapping
96
*
97
* Those values are not meant to be modified by the user
98
* @{
99
*/
100
#define BOARD_IOID_KEY_LEFT IOID_13
101
#define BOARD_IOID_KEY_RIGHT IOID_14
102
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
103
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
104
/** @} */
105
/*---------------------------------------------------------------------------*/
106
/**
107
* \name External flash IOID mapping
108
*
109
* Those values are not meant to be modified by the user
110
* @{
111
*/
112
#define EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0
113
114
#define EXT_FLASH_SPI_PIN_SCK IOID_10
115
#define EXT_FLASH_SPI_PIN_MOSI IOID_9
116
#define EXT_FLASH_SPI_PIN_MISO IOID_8
117
#define EXT_FLASH_SPI_PIN_CS IOID_20
118
119
#define EXT_FLASH_DEVICE_ID 0x14
120
#define EXT_FLASH_MID 0xC2
121
122
#define EXT_FLASH_PROGRAM_PAGE_SIZE 256
123
#define EXT_FLASH_ERASE_SECTOR_SIZE 4096
124
/** @} */
125
/*---------------------------------------------------------------------------*/
126
/**
127
* \brief I2C IOID mappings
128
*
129
* Those values are not meant to be modified by the user
130
* @{
131
*/
132
#define BOARD_IOID_SCL IOID_4
133
#define BOARD_IOID_SDA IOID_5
134
/** @} */
135
/*---------------------------------------------------------------------------*/
136
/**
137
* \brief ROM bootloader configuration
138
*
139
* Change CCXXWARE_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which
140
* button triggers the bootloader on reset. Use CCXXWARE_CONF_BL_LEVEL to
141
* control the pin level that enables the bootloader (0: low, 1: high). It is
142
* also possible to use any other externally-controlled DIO.
143
* @{
144
*/
145
#define CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT
146
#define CCXXWARE_CONF_BL_LEVEL 0
147
/** @} */
148
/*---------------------------------------------------------------------------*/
149
/**
150
* \brief Remaining pins
151
*
152
* Those values are not meant to be modified by the user
153
* @{
154
*/
155
#define BOARD_IOID_DIO0 IOID_0
156
#define BOARD_IOID_DIO1 IOID_1
157
#define BOARD_IOID_CS IOID_11
158
#define BOARD_IOID_TDO IOID_16
159
#define BOARD_IOID_TDI IOID_17
160
#define BOARD_IOID_DIO12 IOID_12
161
#define BOARD_IOID_DIO15 IOID_15
162
#define BOARD_IOID_DIO21 IOID_21
163
#define BOARD_IOID_DIO22 IOID_22
164
#define BOARD_IOID_DIO23 IOID_23
165
#define BOARD_IOID_DIO24 IOID_24
166
#define BOARD_IOID_DIO25 IOID_25
167
#define BOARD_IOID_DIO26 IOID_26
168
#define BOARD_IOID_DIO27 IOID_27
169
#define BOARD_IOID_DIO28 IOID_28
170
#define BOARD_IOID_DIO29 IOID_29
171
#define BOARD_IOID_DIO30 IOID_30
172
173
#define BOARD_UNUSED_PINS { \
174
BOARD_IOID_DIO0, BOARD_IOID_DIO1, BOARD_IOID_CS, BOARD_IOID_TDO, \
175
BOARD_IOID_TDI, BOARD_IOID_DIO12, BOARD_IOID_DIO15, BOARD_IOID_DIO21, \
176
BOARD_IOID_DIO22, BOARD_IOID_DIO23, BOARD_IOID_DIO24, BOARD_IOID_DIO25, \
177
BOARD_IOID_DIO26, BOARD_IOID_DIO27, BOARD_IOID_DIO28, BOARD_IOID_DIO29, \
178
BOARD_IOID_DIO30, IOID_UNUSED \
179
}
180
/** @} */
181
/*---------------------------------------------------------------------------*/
182
/**
183
* \brief Board indices for the button HAL
184
*
185
* Those values are not meant to be modified by the user
186
* @{
187
*/
188
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
189
#define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
190
/** @} */
191
/*---------------------------------------------------------------------------*/
192
/**
193
* \name Device string used on startup
194
* @{
195
*/
196
#define BOARD_STRING "LAUNCHXL-CC2640R2"
197
198
/** @} */
199
/*---------------------------------------------------------------------------*/
200
#endif
/* BOARD_H_ */
201
/*---------------------------------------------------------------------------*/
202
/**
203
* @}
204
* @}
205
*/
ioc.h
Header file with declarations for the I/O Control module.
Generated on Sat May 30 2020 17:57:34 for Contiki-NG by
1.8.13