Contiki-NG
arch
cpu
cc26xx-cc13xx
rf-core
rf-switch.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/** \addtogroup rf-core
32
* @{
33
*
34
* \defgroup rf-switch RF Switch
35
*
36
* Header file for RF switch support
37
*
38
* @{
39
*
40
* \file
41
* Header file with definitions related to RF switch support
42
*/
43
/*---------------------------------------------------------------------------*/
44
#ifndef RF_SWITCH_H_
45
#define RF_SWITCH_H_
46
/*---------------------------------------------------------------------------*/
47
#include "contiki.h"
48
49
#include <stdint.h>
50
/*---------------------------------------------------------------------------*/
51
#ifdef RF_SWITCH_CONF_PATH_2_4GHZ
52
#define RF_SWITCH_PATH_2_4GHZ RF_SWITCH_CONF_PATH_2_4GHZ
53
#else
54
#define RF_SWITCH_PATH_2_4GHZ 0
55
#endif
56
57
#ifdef RF_SWITCH_CONF_PATH_SUBGHZ
58
#define RF_SWITCH_PATH_SUBGHZ RF_SWITCH_CONF_PATH_SUBGHZ
59
#else
60
#define RF_SWITCH_PATH_SUBGHZ 1
61
#endif
62
/*---------------------------------------------------------------------------*/
63
#ifdef RF_SWITCH_CONF_ENABLE
64
#define RF_SWITCH_ENABLE RF_SWITCH_CONF_ENABLE
65
#else
66
#define RF_SWITCH_ENABLE 0
67
#endif
68
/*---------------------------------------------------------------------------*/
69
#if RF_SWITCH_ENABLE
70
/**
71
* \brief Initialise RF switch pin states.
72
*/
73
void
rf_switch_init(
void
);
74
75
/**
76
* \brief Power up the RF switch.
77
*/
78
void
rf_switch_power_up(
void
);
79
80
/**
81
* \brief Power down the RF switch.
82
*/
83
void
rf_switch_power_down(
void
);
84
85
/**
86
* \brief Select RF path
87
* \param path The RF path to select on the switch.
88
*
89
* The path argument can take values RF_SWITCH_PATH_xyz
90
*/
91
void
rf_switch_select_path(uint8_t path);
92
#else
93
#define rf_switch_init()
94
#define rf_switch_power_up()
95
#define rf_switch_power_down()
96
#define rf_switch_select_path(p)
97
#endif
/* RF_SWITCH_ENABLE */
98
/*---------------------------------------------------------------------------*/
99
#endif
/* RF_SWITCH_H_ */
100
/*---------------------------------------------------------------------------*/
101
/**
102
* @}
103
* @}
104
*/
Generated on Sat May 30 2020 17:57:34 for Contiki-NG by
1.8.13