Contiki-NG
contiki-conf.h
Go to the documentation of this file.
1/*
2 * Copyright (c) 2014, OpenMote Technologies, S.L.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the Institute nor the names of its contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 * This file is part of the Contiki operating system.
30 *
31 */
32/*---------------------------------------------------------------------------*/
33/**
34 * \addtogroup openmote-platform
35 * @{
36 *
37 * \defgroup openmote-boards OpenMote boards
38 * @{
39 *
40 * \file
41 * Configuration for the OpenMote platform
42 */
43#ifndef CONTIKI_CONF_H_
44#define CONTIKI_CONF_H_
45
46#include <stdint.h>
47#include <string.h>
48#include <inttypes.h>
49/*---------------------------------------------------------------------------*/
50/* Include Project Specific conf */
51#ifdef PROJECT_CONF_PATH
52#include PROJECT_CONF_PATH
53#endif /* PROJECT_CONF_PATH */
54/*---------------------------------------------------------------------------*/
55#include "cc2538-def.h"
56/*---------------------------------------------------------------------------*/
57/**
58 * \name CC2538 System Control configuration
59 *
60 * @{
61 */
62#ifndef SYS_CTRL_CONF_OSC32K_USE_XTAL
63#define SYS_CTRL_CONF_OSC32K_USE_XTAL 1 /**< Use the on-board 32.768-kHz crystal */
64#endif
65/** @} */
66/*---------------------------------------------------------------------------*/
67/* board.h assumes that basic configuration is done */
68#include "board.h"
69/*---------------------------------------------------------------------------*/
70/**
71 * \name Serial Boot Loader Backdoor configuration
72 *
73 * @{
74 */
75#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR
76#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR 1 /**<Enable the boot loader backdoor */
77#endif
78
79#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN
80#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN 6 /**< Pin PA6 (ON/SLEEP on the OpenBase), activates the boot loader */
81#endif
82
83#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH
84#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH 0 /**< A logic low level activates the boot loader */
85#endif
86/** @} */
87/*---------------------------------------------------------------------------*/
88/* Include CPU-related configuration */
89#include "cc2538-conf.h"
90/*---------------------------------------------------------------------------*/
91#endif /* CONTIKI_CONF_H_ */
92/*---------------------------------------------------------------------------*/
93/**
94 * @}
95 * @}
96 */