Contiki-NG
|
TCP/IP support in Contiki is implemented using the uIP TCP/IP stack. More...
Macros | |
#define | UIP_APPCALL tcpip_uipcall |
The name of the application function that uIP should call in response to TCP/IP events. | |
Variables | |
process_event_t | tcpip_event |
The uIP event. More... | |
ICMPv6 functions | |
process_event_t | tcpip_icmp6_event |
The ICMP6 event. More... | |
uint8_t | icmp6_new (void *appstate) |
register an ICMPv6 callback More... | |
void | tcpip_icmp6_call (uint8_t type) |
This function is called at reception of an ICMPv6 packet If an application registered as an ICMPv6 listener (with icmp6_new), it will be called through a process_post_synch() | |
TCP/IP packet processing | |
unsigned char | tcpip_do_forwarding |
Is forwarding generally enabled? | |
unsigned char | tcpip_is_forwarding |
void | tcpip_input (void) |
Deliver an incoming packet to the TCP/IP stack. More... | |
uint8_t | tcpip_output (const uip_lladdr_t *) |
Output packet to layer 2 The eventual parameter is the MAC address of the destination. | |
void | tcpip_ipv6_output (void) |
This function does address resolution and then calls tcpip_output. | |
#define | tcpip_set_forwarding(forwarding) tcpip_do_forwarding = (forwarding) |
TCP functions | |
void | tcp_attach (struct uip_conn *conn, void *appstate) |
Attach a TCP connection to the current process. More... | |
void | tcp_listen (uint16_t port) |
Open a TCP port. More... | |
void | tcp_unlisten (uint16_t port) |
Close a listening TCP port. More... | |
struct uip_conn * | tcp_connect (const uip_ipaddr_t *ripaddr, uint16_t port, void *appstate) |
Open a TCP connection to the specified IP address and port. More... | |
void | tcpip_poll_tcp (struct uip_conn *conn) |
Cause a specified TCP connection to be polled. More... | |
#define | tcp_markconn(conn, appstate) tcp_attach(conn, appstate) |
UDP functions | |
void | udp_attach (struct uip_udp_conn *conn, void *appstate) |
Attach the current process to a UDP connection. More... | |
struct uip_udp_conn * | udp_new (const uip_ipaddr_t *ripaddr, uint16_t port, void *appstate) |
Create a new UDP connection. More... | |
struct uip_udp_conn * | udp_broadcast_new (uint16_t port, void *appstate) |
Create a new UDP broadcast connection. More... | |
void | tcpip_poll_udp (struct uip_udp_conn *conn) |
Cause a specified UDP connection to be polled. More... | |
#define | udp_markconn(conn, appstate) udp_attach(conn, appstate) |
#define | udp_bind(conn, port) uip_udp_bind(conn, port) |
Bind a UDP connection to a local port. More... | |
TCP/IP support in Contiki is implemented using the uIP TCP/IP stack.
For sending and receiving data, Contiki uses the functions provided by the uIP module, but Contiki adds a set of functions for connection management. The connection management functions make sure that the uIP TCP/IP connections are connected to the correct process.
Contiki also includes an optional protosocket library that provides an API similar to the BSD socket API.
#define udp_bind | ( | conn, | |
port | |||
) | uip_udp_bind(conn, port) |
Bind a UDP connection to a local port.
This function binds a UDP connection to a specified local port.
When a connection is created with udp_new(), it gets a local port number assigned automatically. If the application needs to bind the connection to a specified local port, this function should be used.
conn | A pointer to the UDP connection that is to be bound. |
port | The port number in network byte order to which to bind the connection. |
uint8_t icmp6_new | ( | void * | appstate | ) |
register an ICMPv6 callback
This function just registers a process to be polled when an ICMPv6 message is received. If no application registers, some ICMPv6 packets will be processed by the "kernel" as usual (NS, NA, RS, RA, Echo request), others will be dropped. If an application registers here, it will be polled with a process_post_synch every time an ICMPv6 packet is received.
Definition at line 292 of file tcpip.c.
References uip_icmp6_conns.
void tcp_attach | ( | struct uip_conn * | conn, |
void * | appstate | ||
) |
Attach a TCP connection to the current process.
This function attaches the current process to a TCP connection. Each TCP connection must be attached to a process in order for the process to be able to receive and send data. Additionally, this function can add a pointer with connection state to the connection.
conn | A pointer to the TCP connection. |
appstate | An opaque pointer that will be passed to the process whenever an event occurs on the connection. |
struct uip_conn * tcp_connect | ( | const uip_ipaddr_t * | ripaddr, |
uint16_t | port, | ||
void * | appstate | ||
) |
Open a TCP connection to the specified IP address and port.
This function opens a TCP connection to the specified port at the host specified with an IP address. Additionally, an opaque pointer can be attached to the connection. This pointer will be sent together with uIP events to the process.
ripaddr | Pointer to the IP address of the remote host. |
port | Port number in network byte order. |
appstate | Pointer to application defined data. |
void tcp_listen | ( | uint16_t | port | ) |
Open a TCP port.
This function opens a TCP port for listening. When a TCP connection request occurs for the port, the process will be sent a tcpip_event with the new connection request.
port | The port number in network byte order. |
void tcp_unlisten | ( | uint16_t | port | ) |
Close a listening TCP port.
This function closes a listening TCP port.
port | The port number in network byte order. |
void tcpip_input | ( | void | ) |
Deliver an incoming packet to the TCP/IP stack.
This function is called by network device drivers to deliver an incoming packet to the TCP/IP stack. The incoming packet must be present in the uip_buf buffer, and the length of the packet must be in the global uip_len variable.
void tcpip_poll_tcp | ( | struct uip_conn * | conn | ) |
Cause a specified TCP connection to be polled.
This function causes uIP to poll the specified TCP connection. The function is used when the application has data that is to be sent immediately and do not wish to wait for the periodic uIP polling mechanism.
conn | A pointer to the TCP connection that should be polled. |
void tcpip_poll_udp | ( | struct uip_udp_conn * | conn | ) |
Cause a specified UDP connection to be polled.
This function causes uIP to poll the specified UDP connection. The function is used when the application has data that is to be sent immediately and do not wish to wait for the periodic uIP polling mechanism.
conn | A pointer to the UDP connection that should be polled. |
void udp_attach | ( | struct uip_udp_conn * | conn, |
void * | appstate | ||
) |
Attach the current process to a UDP connection.
This function attaches the current process to a UDP connection. Each UDP connection must have a process attached to it in order for the process to be able to receive and send data over the connection. Additionally, this function can add a pointer with connection state to the connection.
conn | A pointer to the UDP connection. |
appstate | An opaque pointer that will be passed to the process whenever an event occurs on the connection. |
struct uip_udp_conn * udp_broadcast_new | ( | uint16_t | port, |
void * | appstate | ||
) |
Create a new UDP broadcast connection.
This function creates a new (link-local) broadcast UDP connection to a specified port.
port | Port number in network byte order. |
appstate | Pointer to application defined data. |
Definition at line 275 of file tcpip.c.
References addr.
struct uip_udp_conn * udp_new | ( | const uip_ipaddr_t * | ripaddr, |
uint16_t | port, | ||
void * | appstate | ||
) |
Create a new UDP connection.
This function creates a new UDP connection with the specified remote endpoint.
ripaddr | Pointer to the IP address of the remote host. |
port | Port number in network byte order. |
appstate | Pointer to application defined data. |
|
extern |