Contiki-NG
|
Defines related to the CC1310 LaunchPad. More...
Files | |
file | board.h |
Header file with definitions related to the I/O connections on the TI CC1310 LaunchPad. | |
LED HAL configuration | |
Those values are not meant to be modified by the user | |
#define | LEDS_CONF_COUNT 2 |
#define | LEDS_CONF_RED 1 |
#define | LEDS_CONF_GREEN 2 |
LED IOID mappings | |
Those values are not meant to be modified by the user | |
#define | BOARD_IOID_LED_1 IOID_6 |
#define | BOARD_IOID_LED_2 IOID_7 |
External flash IOID mapping | |
Those values are not meant to be modified by the user | |
#define | EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0 |
#define | EXT_FLASH_SPI_PIN_SCK IOID_10 |
#define | EXT_FLASH_SPI_PIN_MOSI IOID_9 |
#define | EXT_FLASH_SPI_PIN_MISO IOID_8 |
#define | EXT_FLASH_SPI_PIN_CS IOID_20 |
#define | EXT_FLASH_DEVICE_ID 0x14 |
#define | EXT_FLASH_MID 0xC2 |
#define | EXT_FLASH_PROGRAM_PAGE_SIZE 256 |
#define | EXT_FLASH_ERASE_SECTOR_SIZE 4096 |
#define | BOARD_IOID_SCL IOID_4 |
I2C IOID mappings. More... | |
#define | CCFG_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT |
ROM bootloader configuration. More... | |
#define | BOARD_IOID_DIO1 IOID_1 |
Remaining pins. More... | |
#define | BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
Board indices for the button HAL. More... | |
Device string used on startup | |
#define | BOARD_STRING "TI CC1310 LaunchPad" |
Defines related to the CC1310 LaunchPad.
This file provides connectivity information on LEDs, Buttons, UART and other peripherals
This file is not meant to be modified by the user.
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
#define BOARD_IOID_DIO1 IOID_1 |
#define BOARD_IOID_SCL IOID_4 |
#define CCFG_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT |
ROM bootloader configuration.
Change CCFG_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which button triggers the bootloader on reset. Use CCFG_CONF_BL_LEVEL to control the pin level that enables the bootloader (0: low, 1: high). It is also possible to use any other externally-controlled DIO.