Contiki-NG
|
This group documents the TI CC26xx and CC13xx CPUs. More...
Modules | |
CC13xx-CC26xx master interrupt manipulation | |
Master interrupt manipulation routines for the CC13xx and CC26xx CPUs. | |
CC13xx/CC26xx ADC Sensor | |
CC13xx/CC26xx AUX domain controller | |
CC13xx/CC26xx AUX domain power management controller. | |
CC13xx/CC26xx BatMon sensor driver | |
Driver for the on-chip battery voltage and chip temperature sensor. | |
CC13xx/CC26xx CMSIS | |
CC13xx/CC26xx Cortex-M4 CMSIS definitions. | |
CC13xx/CC26xx CMSIS | |
CC13xx/CC26xx Cortex-M3 CMSIS definitions. | |
CC13xx/CC26xx GPIO HAL implementation | |
CC13xx/CC26xx IEEE Address Control | |
Driver for the retrieval of an IEEE address from flash. | |
CC13xx/CC26xx Low-Power management | |
CC13xx/CC26xx low-power operation. | |
CC13xx/CC26xx RF core | |
Different flavours of chips of the CC13xx/CC26xx family have different radio capability. | |
CC13xx/CC26xx Random Number Generator | |
Driver for the CC13xx/CC26xx Random Number Generator. | |
CC13xx/CC26xx UARTs | |
Driver for the CC13xx/CC26xx UART controller. | |
CC13xx/CC26xx clock and timer subsystem | |
For the CC13xx/CC26xx cpu we use the AON RTC as the basis for all clocks and timers. | |
CC13xx/CC26xx oscillator control | |
Wrapper around CC26xxware/CC13xxware OSC functions that we need in Contiki. | |
CC26x0/CC13x0 AES-128 | |
AES-128 driver for the CC26x0/CC13x0 SoC. | |
Customer Configuration (CCFG) | |
TI CC26xxware/CC13xxware Glue | |
Glue file which renames TI CC26xxware functions. | |
Files | |
file | cc13xx-cc26xx-conf.h |
Header with configuration defines common to all CC13xx/CC26xx platforms. | |
file | gpio-interrupt.c |
CC13xx/CC26xx GPIO interrupt ISR. | |
RF configuration | |
#define | IEEE_MODE_CONF_AUTOACK 1 |
RF H/W generates ACKs. | |
#define | IEEE_MODE_CONF_PROMISCOUS 0 |
1 to enable promiscous mode | |
#define | RF_BLE_CONF_ENABLED 0 |
0 to disable BLE support | |
Character I/O Configuration | |
#define | TI_UART_CONF_ENABLE 1 |
Enable/Disable UART I/O. | |
#define | TI_UART_CONF_BAUD_RATE 115200 |
Default UART0 baud rate. | |
#define | BOARD_CONF_DEBUGGER_DEVPACK 1 |
This group documents the TI CC26xx and CC13xx CPUs.
The two CPU families are very similar, with the main difference being related to radio capability.
Documentation in this group should be considered to be applicable to both families, unless explicitly stated otherwise.