Contiki-NG
board.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/** \addtogroup cc26xx-srf-tag
32
* @{
33
*
34
* \defgroup srf06-cc13xx-peripherals Peripherals for the SmartRF06EB + CC1310EM
35
*
36
* Defines related to the SmartRF06 Evaluation Board with a CC1310EM
37
*
38
* This file provides connectivity information on LEDs, Buttons, UART and
39
* other peripherals
40
*
41
* This file can be used as the basis to configure other boards using the
42
* CC13xx/CC26xx code as their basis.
43
*
44
* This file is not meant to be modified by the user.
45
* @{
46
*
47
* \file
48
* Header file with definitions related to the I/O connections on the TI
49
* SmartRF06 Evaluation Board with a CC1310EM
50
*
51
* \note Do not include this file directly. It gets included by contiki-conf
52
* after all relevant directives have been set.
53
*/
54
/*---------------------------------------------------------------------------*/
55
#ifndef BOARD_H_
56
#define BOARD_H_
57
/*---------------------------------------------------------------------------*/
58
#include "
ioc.h
"
59
/*---------------------------------------------------------------------------*/
60
/**
61
* \name LED HAL configuration
62
*
63
* Those values are not meant to be modified by the user
64
* @{
65
*/
66
#define LEDS_CONF_COUNT 4
67
#define LEDS_CONF_RED 1
68
#define LEDS_CONF_YELLOW 2
69
#define LEDS_CONF_GREEN 4
70
#define LEDS_CONF_ORANGE 8
71
/** @} */
72
/*---------------------------------------------------------------------------*/
73
/**
74
* \name LED IOID mappings
75
*
76
* Those values are not meant to be modified by the user
77
* @{
78
*/
79
#define BOARD_IOID_LED_1 IOID_25
80
#define BOARD_IOID_LED_2 IOID_27
81
#define BOARD_IOID_LED_3 IOID_7
82
#define BOARD_IOID_LED_4 IOID_6
83
/** @} */
84
/*---------------------------------------------------------------------------*/
85
/**
86
* \name UART IOID mapping
87
*
88
* Those values are not meant to be modified by the user
89
* @{
90
*/
91
#define BOARD_IOID_UART_RX IOID_2
92
#define BOARD_IOID_UART_TX IOID_3
93
#define BOARD_IOID_UART_CTS IOID_UNUSED
94
#define BOARD_IOID_UART_RTS IOID_UNUSED
95
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
96
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
97
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
98
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
99
/** @} */
100
/*---------------------------------------------------------------------------*/
101
/**
102
* \name Button IOID mapping
103
*
104
* Those values are not meant to be modified by the user
105
* @{
106
*/
107
#define BOARD_IOID_KEY_LEFT IOID_15
108
#define BOARD_IOID_KEY_RIGHT IOID_18
109
#define BOARD_IOID_KEY_UP IOID_19
110
#define BOARD_IOID_KEY_DOWN IOID_12
111
#define BOARD_IOID_KEY_SELECT IOID_11
112
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
113
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
114
#define BOARD_KEY_UP (1 << BOARD_IOID_KEY_UP)
115
#define BOARD_KEY_DOWN (1 << BOARD_IOID_KEY_DOWN)
116
#define BOARD_KEY_SELECT (1 << BOARD_IOID_KEY_SELECT)
117
/** @} */
118
/*---------------------------------------------------------------------------*/
119
/**
120
* \name 3.3V domain IOID mapping
121
*
122
* Those values are not meant to be modified by the user
123
* @{
124
*/
125
#define BOARD_IOID_3V3_EN IOID_13
126
#define BOARD_3V3_EN (1 << BOARD_IOID_3V3_EN)
127
/** @} */
128
/*---------------------------------------------------------------------------*/
129
/**
130
* \name SPI IOID mapping
131
*
132
* Those values are not meant to be modified by the user
133
* @{
134
*/
135
#define BOARD_IOID_SPI_SCK IOID_10
136
#define BOARD_IOID_SPI_MOSI IOID_9
137
#define BOARD_IOID_SPI_MISO IOID_8
138
#define BOARD_SPI_SCK (1 << BOARD_IOID_SPI_SCK)
139
#define BOARD_SPI_MOSI (1 << BOARD_IOID_SPI_MOSI)
140
#define BOARD_SPI_MISO (1 << BOARD_IOID_SPI_MISO)
141
/** @} */
142
/*---------------------------------------------------------------------------*/
143
/**
144
* \name LCD IOID mapping
145
*
146
* Those values are not meant to be modified by the user
147
* @{
148
*/
149
#define BOARD_IOID_LCD_MODE IOID_4
150
#define BOARD_IOID_LCD_RST IOID_5
151
#define BOARD_IOID_LCD_CS IOID_14
152
#define BOARD_IOID_LCD_SCK BOARD_IOID_SPI_SCK
153
#define BOARD_IOID_LCD_MOSI BOARD_IOID_SPI_MOSI
154
#define BOARD_LCD_MODE (1 << BOARD_IOID_LCD_MODE)
155
#define BOARD_LCD_RST (1 << BOARD_IOID_LCD_RST)
156
#define BOARD_LCD_CS (1 << BOARD_IOID_LCD_CS)
157
#define BOARD_LCD_SCK BOARD_SPI_SCK
158
#define BOARD_LCD_MOSI BOARD_SPI_MOSI
159
/** @} */
160
/*---------------------------------------------------------------------------*/
161
/**
162
* \name SD Card IOID mapping
163
*
164
* Those values are not meant to be modified by the user
165
* @{
166
*/
167
#define BOARD_IOID_SDCARD_CS IOID_30
168
#define BOARD_SDCARD_CS (1 << BOARD_IOID_SDCARD_CS)
169
#define BOARD_IOID_SDCARD_SCK BOARD_IOID_SPI_SCK
170
#define BOARD_SDCARD_SCK BOARD_SPI_SCK
171
#define BOARD_IOID_SDCARD_MOSI BOARD_IOID_SPI_MOSI
172
#define BOARD_SDCARD_MOSI BOARD_SPI_MOSI
173
#define BOARD_IOID_SDCARD_MISO BOARD_IOID_SPI_MISO
174
#define BOARD_SDCARD_MISO BOARD_SPI_MISO
175
/** @} */
176
/*---------------------------------------------------------------------------*/
177
/**
178
* \name ALS IOID mapping
179
*
180
* Those values are not meant to be modified by the user
181
* @{
182
*/
183
#define BOARD_IOID_ALS_PWR IOID_26
184
#define BOARD_IOID_ALS_OUT IOID_23
185
#define BOARD_ALS_PWR (1 << BOARD_IOID_ALS_PWR)
186
#define BOARD_ALS_OUT (1 << BOARD_IOID_ALS_OUT)
187
/** @} */
188
/*---------------------------------------------------------------------------*/
189
/**
190
* \name ACC IOID mapping
191
*
192
* Those values are not meant to be modified by the user
193
* @{
194
*/
195
#define BOARD_IOID_ACC_PWR IOID_20
196
#define BOARD_IOID_ACC_INT IOID_28
197
#define BOARD_IOID_ACC_INT1 IOID_28
198
#define BOARD_IOID_ACC_INT2 IOID_29
199
#define BOARD_IOID_ACC_CS IOID_24
200
#define BOARD_ACC_PWR (1 << BOARD_IOID_ACC_PWR)
201
#define BOARD_ACC_INT (1 << BOARD_IOID_ACC_INT)
202
#define BOARD_ACC_INT1 (1 << BOARD_IOID_ACC_INT1)
203
#define BOARD_ACC_INT2 (1 << BOARD_IOID_ACC_INT2)
204
#define BOARD_ACC_CS (1 << BOARD_IOID_ACC_CS)
205
#define BOARD_IOID_ACC_SCK BOARD_IOID_SPI_SCK
206
#define BOARD_ACC_SCK BOARD_SPI_SCK
207
#define BOARD_IOID_ACC_MOSI BOARD_IOID_SPI_MOSI
208
#define BOARD_ACC_MOSI BOARD_SPI_MOSI
209
#define BOARD_IOID_ACC_MISO BOARD_IOID_SPI_MISO
210
#define BOARD_ACC_MISO BOARD_SPI_MISO
211
/** @} */
212
/*---------------------------------------------------------------------------*/
213
/**
214
* \brief ROM bootloader configuration
215
*
216
* Change CCFG_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which
217
* button triggers the bootloader on reset. Use CCFG_CONF_BL_LEVEL to
218
* control the pin level that enables the bootloader (0: low, 1: high). It is
219
* also possible to use any other externally-controlled DIO.
220
* @{
221
*/
222
#define CCFG_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_SELECT
223
#define CCFG_CONF_BL_LEVEL 0
224
/** @} */
225
/*---------------------------------------------------------------------------*/
226
/**
227
* \brief Board indices for the button HAL
228
*
229
* Those values are not meant to be modified by the user
230
* @{
231
*/
232
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
233
#define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
234
#define BOARD_BUTTON_HAL_INDEX_KEY_UP 0x02
235
#define BOARD_BUTTON_HAL_INDEX_KEY_DOWN 0x03
236
#define BOARD_BUTTON_HAL_INDEX_KEY_SELECT 0x04
237
/** @} */
238
/*---------------------------------------------------------------------------*/
239
/**
240
* \name Device string used on startup
241
* @{
242
*/
243
#define BOARD_STRING "TI SmartRF06EB + CC13xx EM"
244
/** @} */
245
/*---------------------------------------------------------------------------*/
246
#endif
/* BOARD_H_ */
247
/*---------------------------------------------------------------------------*/
248
/**
249
* @}
250
* @}
251
*/
ioc.h
Header file with declarations for the I/O Control module.
arch
platform
cc26x0-cc13x0
srf06
cc13x0
board.h
Generated on Wed Jul 12 2023 12:33:25 for Contiki-NG by
1.9.4