Contiki-NG
CC1352P_2_LAUNCHXL.c
1/*
2 * Copyright (c) 2017-2019, Texas Instruments Incorporated
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * * Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 *
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * * Neither the name of Texas Instruments Incorporated nor the names of
17 * its contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/*
34 * ====================== CC1352P_2_LAUNCHXL.c ===================================
35 * This file is responsible for setting up the board specific items for the
36 * CC1352P_2_LAUNCHXL board.
37 */
38
39#include <stdbool.h>
40#include <stddef.h>
41#include <stdint.h>
42
43#include <ti/devices/DeviceFamily.h>
44#include DeviceFamily_constructPath(driverlib/ioc.h)
45#include DeviceFamily_constructPath(driverlib/udma.h)
46#include DeviceFamily_constructPath(inc/hw_ints.h)
47#include DeviceFamily_constructPath(inc/hw_memmap.h)
48
49#include "CC1352P_2_LAUNCHXL.h"
50
51/*
52 * =============================== ADCBuf ===============================
53 */
54#include <ti/drivers/ADCBuf.h>
55#include <ti/drivers/adcbuf/ADCBufCC26X2.h>
56
57ADCBufCC26X2_Object adcBufCC26xxObjects[CC1352P_2_LAUNCHXL_ADCBUFCOUNT];
58
59/*
60 * This table converts a virtual adc channel into a dio and internal analogue
61 * input signal. This table is necessary for the functioning of the adcBuf
62 * driver. Comment out unused entries to save flash. Dio and internal signal
63 * pairs are hardwired. Do not remap them in the table. You may reorder entire
64 * entries. The mapping of dio and internal signals is package dependent.
65 */
66const ADCBufCC26X2_AdcChannelLutEntry ADCBufCC26X2_adcChannelLut[CC1352P_2_LAUNCHXL_ADCBUF0CHANNELCOUNT] = {
67 {CC1352P_2_LAUNCHXL_DIO23_ANALOG, ADC_COMPB_IN_AUXIO7},
68 {CC1352P_2_LAUNCHXL_DIO24_ANALOG, ADC_COMPB_IN_AUXIO6},
69 {CC1352P_2_LAUNCHXL_DIO25_ANALOG, ADC_COMPB_IN_AUXIO5},
70 {CC1352P_2_LAUNCHXL_DIO26_ANALOG, ADC_COMPB_IN_AUXIO4},
71 {CC1352P_2_LAUNCHXL_DIO27_ANALOG, ADC_COMPB_IN_AUXIO3},
72 {PIN_UNASSIGNED, ADC_COMPB_IN_VDDS},
73 {PIN_UNASSIGNED, ADC_COMPB_IN_DCOUPL},
74 {PIN_UNASSIGNED, ADC_COMPB_IN_VSS},
75};
76
77const ADCBufCC26X2_HWAttrs adcBufCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCBUFCOUNT] = {
78 {
79 .intPriority = ~0,
80 .swiPriority = 0,
81 .adcChannelLut = ADCBufCC26X2_adcChannelLut,
82 .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER0A,
83 }
84};
85
86const ADCBuf_Config ADCBuf_config[CC1352P_2_LAUNCHXL_ADCBUFCOUNT] = {
87 {
88 &ADCBufCC26X2_fxnTable,
89 &adcBufCC26xxObjects[CC1352P_2_LAUNCHXL_ADCBUF0],
90 &adcBufCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCBUF0]
91 },
92};
93
94const uint_least8_t ADCBuf_count = CC1352P_2_LAUNCHXL_ADCBUFCOUNT;
95
96/*
97 * =============================== ADC ===============================
98 */
99#include <ti/drivers/ADC.h>
100#include <ti/drivers/adc/ADCCC26XX.h>
101
102ADCCC26XX_Object adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADCCOUNT];
103
104const ADCCC26XX_HWAttrs adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCCOUNT] = {
105 {
106 .adcDIO = CC1352P_2_LAUNCHXL_DIO23_ANALOG,
107 .adcCompBInput = ADC_COMPB_IN_AUXIO7,
108 .refSource = ADCCC26XX_FIXED_REFERENCE,
109 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
110 .inputScalingEnabled = true,
111 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
112 .returnAdjustedVal = false
113 },
114 {
115 .adcDIO = CC1352P_2_LAUNCHXL_DIO24_ANALOG,
116 .adcCompBInput = ADC_COMPB_IN_AUXIO6,
117 .refSource = ADCCC26XX_FIXED_REFERENCE,
118 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
119 .inputScalingEnabled = true,
120 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
121 .returnAdjustedVal = false
122 },
123 {
124 .adcDIO = CC1352P_2_LAUNCHXL_DIO25_ANALOG,
125 .adcCompBInput = ADC_COMPB_IN_AUXIO5,
126 .refSource = ADCCC26XX_FIXED_REFERENCE,
127 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
128 .inputScalingEnabled = true,
129 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
130 .returnAdjustedVal = false
131 },
132 {
133 .adcDIO = CC1352P_2_LAUNCHXL_DIO26_ANALOG,
134 .adcCompBInput = ADC_COMPB_IN_AUXIO4,
135 .refSource = ADCCC26XX_FIXED_REFERENCE,
136 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
137 .inputScalingEnabled = true,
138 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
139 .returnAdjustedVal = false
140 },
141 {
142 .adcDIO = CC1352P_2_LAUNCHXL_DIO27_ANALOG,
143 .adcCompBInput = ADC_COMPB_IN_AUXIO3,
144 .refSource = ADCCC26XX_FIXED_REFERENCE,
145 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
146 .inputScalingEnabled = true,
147 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
148 .returnAdjustedVal = false
149 },
150 {
151 .adcDIO = PIN_UNASSIGNED,
152 .adcCompBInput = ADC_COMPB_IN_DCOUPL,
153 .refSource = ADCCC26XX_FIXED_REFERENCE,
154 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
155 .inputScalingEnabled = true,
156 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
157 .returnAdjustedVal = false
158 },
159 {
160 .adcDIO = PIN_UNASSIGNED,
161 .adcCompBInput = ADC_COMPB_IN_VSS,
162 .refSource = ADCCC26XX_FIXED_REFERENCE,
163 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
164 .inputScalingEnabled = true,
165 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
166 .returnAdjustedVal = false
167 },
168 {
169 .adcDIO = PIN_UNASSIGNED,
170 .adcCompBInput = ADC_COMPB_IN_VDDS,
171 .refSource = ADCCC26XX_FIXED_REFERENCE,
172 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
173 .inputScalingEnabled = true,
174 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
175 .returnAdjustedVal = false
176 }
177};
178
179const ADC_Config ADC_config[CC1352P_2_LAUNCHXL_ADCCOUNT] = {
180 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADC0], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADC0]},
181 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADC1], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADC1]},
182 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADC2], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADC2]},
183 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADC3], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADC3]},
184 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADC4], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADC4]},
185 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADCDCOUPL], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCDCOUPL]},
186 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADCVSS], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCVSS]},
187 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352P_2_LAUNCHXL_ADCVDDS], &adcCC26xxHWAttrs[CC1352P_2_LAUNCHXL_ADCVDDS]},
188};
189
190const uint_least8_t ADC_count = CC1352P_2_LAUNCHXL_ADCCOUNT;
191
192/*
193 * =============================== ECDH ===============================
194 */
195#include <ti/drivers/ECDH.h>
196#include <ti/drivers/ecdh/ECDHCC26X2.h>
197
198ECDHCC26X2_Object ecdhCC26X2Objects[CC1352P_2_LAUNCHXL_ECDHCOUNT];
199
200const ECDHCC26X2_HWAttrs ecdhCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECDHCOUNT] = {
201 {
202 .intPriority = ~0,
203 }
204};
205
206const ECDH_Config ECDH_config[CC1352P_2_LAUNCHXL_ECDHCOUNT] = {
207 {
208 .object = &ecdhCC26X2Objects[CC1352P_2_LAUNCHXL_ECDH0],
209 .hwAttrs = &ecdhCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECDH0]
210 },
211};
212
213const uint_least8_t ECDH_count = CC1352P_2_LAUNCHXL_ECDHCOUNT;
214
215/*
216 * =============================== ECDSA ===============================
217 */
218#include <ti/drivers/ECDSA.h>
219#include <ti/drivers/ecdsa/ECDSACC26X2.h>
220
221ECDSACC26X2_Object ecdsaCC26X2Objects[CC1352P_2_LAUNCHXL_ECDSACOUNT];
222
223const ECDSACC26X2_HWAttrs ecdsaCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECDSACOUNT] = {
224 {
225 .intPriority = ~0,
226 }
227};
228
229const ECDSA_Config ECDSA_config[CC1352P_2_LAUNCHXL_ECDSACOUNT] = {
230 {
231 .object = &ecdsaCC26X2Objects[CC1352P_2_LAUNCHXL_ECDSA0],
232 .hwAttrs = &ecdsaCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECDSA0]
233 },
234};
235
236const uint_least8_t ECDSA_count = CC1352P_2_LAUNCHXL_ECDSACOUNT;
237
238/*
239 * =============================== ECJPAKE ===============================
240 */
241#include <ti/drivers/ECJPAKE.h>
242#include <ti/drivers/ecjpake/ECJPAKECC26X2.h>
243
244ECJPAKECC26X2_Object ecjpakeCC26X2Objects[CC1352P_2_LAUNCHXL_ECJPAKECOUNT];
245
246const ECJPAKECC26X2_HWAttrs ecjpakeCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECJPAKECOUNT] = {
247 {
248 .intPriority = ~0,
249 }
250};
251
252const ECJPAKE_Config ECJPAKE_config[CC1352P_2_LAUNCHXL_ECJPAKECOUNT] = {
253 {
254 .object = &ecjpakeCC26X2Objects[CC1352P_2_LAUNCHXL_ECJPAKE0],
255 .hwAttrs = &ecjpakeCC26X2HWAttrs[CC1352P_2_LAUNCHXL_ECJPAKE0]
256 },
257};
258
259const uint_least8_t ECJPAKE_count = CC1352P_2_LAUNCHXL_ECJPAKECOUNT;
260
261
262/*
263 * =============================== SHA2 ===============================
264 */
265#include <ti/drivers/SHA2.h>
266#include <ti/drivers/sha2/SHA2CC26X2.h>
267
268SHA2CC26X2_Object sha2CC26X2Objects[CC1352P_2_LAUNCHXL_SHA2COUNT];
269
270const SHA2CC26X2_HWAttrs sha2CC26X2HWAttrs[CC1352P_2_LAUNCHXL_SHA2COUNT] = {
271 {
272 .intPriority = ~0,
273 }
274};
275
276const SHA2_Config SHA2_config[CC1352P_2_LAUNCHXL_SHA2COUNT] = {
277 {
278 .object = &sha2CC26X2Objects[CC1352P_2_LAUNCHXL_SHA20],
279 .hwAttrs = &sha2CC26X2HWAttrs[CC1352P_2_LAUNCHXL_SHA20]
280 },
281};
282
283const uint_least8_t SHA2_count = CC1352P_2_LAUNCHXL_SHA2COUNT;
284
285/*
286 * =============================== AESCCM ===============================
287 */
288#include <ti/drivers/AESCCM.h>
289#include <ti/drivers/aesccm/AESCCMCC26XX.h>
290
291AESCCMCC26XX_Object aesccmCC26XXObjects[CC1352P_2_LAUNCHXL_AESCCMCOUNT];
292
293const AESCCMCC26XX_HWAttrs aesccmCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCCMCOUNT] = {
294 {
295 .intPriority = ~0,
296 }
297};
298
299const AESCCM_Config AESCCM_config[CC1352P_2_LAUNCHXL_AESCCMCOUNT] = {
300 {
301 .object = &aesccmCC26XXObjects[CC1352P_2_LAUNCHXL_AESCCM0],
302 .hwAttrs = &aesccmCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCCM0]
303 },
304};
305
306const uint_least8_t AESCCM_count = CC1352P_2_LAUNCHXL_AESCCMCOUNT;
307
308/*
309 * =============================== AESGCM ===============================
310 */
311#include <ti/drivers/AESGCM.h>
312#include <ti/drivers/aesgcm/AESGCMCC26XX.h>
313
314AESGCMCC26XX_Object aesgcmCC26XXObjects[CC1352P_2_LAUNCHXL_AESGCMCOUNT];
315
316const AESGCMCC26XX_HWAttrs aesgcmCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESGCMCOUNT] = {
317 {
318 .intPriority = ~0,
319 }
320};
321
322const AESGCM_Config AESGCM_config[CC1352P_2_LAUNCHXL_AESGCMCOUNT] = {
323 {
324 .object = &aesgcmCC26XXObjects[CC1352P_2_LAUNCHXL_AESGCM0],
325 .hwAttrs = &aesgcmCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESGCM0]
326 },
327};
328
329const uint_least8_t AESGCM_count = CC1352P_2_LAUNCHXL_AESGCMCOUNT;
330
331/*
332 * =============================== AESCBC ===============================
333 */
334#include <ti/drivers/AESCBC.h>
335#include <ti/drivers/aescbc/AESCBCCC26XX.h>
336
337AESCBCCC26XX_Object aescbcCC26XXObjects[CC1352P_2_LAUNCHXL_AESCBCCOUNT];
338
339const AESCBCCC26XX_HWAttrs aescbcCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCBCCOUNT] = {
340 {
341 .intPriority = ~0,
342 }
343};
344
345const AESCBC_Config AESCBC_config[CC1352P_2_LAUNCHXL_AESCBCCOUNT] = {
346 {
347 .object = &aescbcCC26XXObjects[CC1352P_2_LAUNCHXL_AESCBC0],
348 .hwAttrs = &aescbcCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCBC0]
349 },
350};
351
352const uint_least8_t AESCBC_count = CC1352P_2_LAUNCHXL_AESCBCCOUNT;
353
354/*
355 * =============================== AESCTR ===============================
356 */
357#include <ti/drivers/AESCTR.h>
358#include <ti/drivers/aesctr/AESCTRCC26XX.h>
359
360AESCTRCC26XX_Object aesctrCC26XXObjects[CC1352P_2_LAUNCHXL_AESCTRCOUNT];
361
362const AESCTRCC26XX_HWAttrs aesctrCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCTRCOUNT] = {
363 {
364 .intPriority = ~0,
365 }
366};
367
368const AESCTR_Config AESCTR_config[CC1352P_2_LAUNCHXL_AESCTRCOUNT] = {
369 {
370 .object = &aesctrCC26XXObjects[CC1352P_2_LAUNCHXL_AESCTR0],
371 .hwAttrs = &aesctrCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESCTR0]
372 },
373};
374
375const uint_least8_t AESCTR_count = CC1352P_2_LAUNCHXL_AESCTRCOUNT;
376
377/*
378 * =============================== AESECB ===============================
379 */
380#include <ti/drivers/AESECB.h>
381#include <ti/drivers/aesecb/AESECBCC26XX.h>
382
383AESECBCC26XX_Object aesecbCC26XXObjects[CC1352P_2_LAUNCHXL_AESECBCOUNT];
384
385const AESECBCC26XX_HWAttrs aesecbCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESECBCOUNT] = {
386 {
387 .intPriority = ~0,
388 }
389};
390
391const AESECB_Config AESECB_config[CC1352P_2_LAUNCHXL_AESECBCOUNT] = {
392 {
393 .object = &aesecbCC26XXObjects[CC1352P_2_LAUNCHXL_AESECB0],
394 .hwAttrs = &aesecbCC26XXHWAttrs[CC1352P_2_LAUNCHXL_AESECB0]
395 },
396};
397
398const uint_least8_t AESECB_count = CC1352P_2_LAUNCHXL_AESECBCOUNT;
399
400/*
401 * =============================== AESCTRDRBG ===============================
402 */
403#include <ti/drivers/AESCTRDRBG.h>
404#include <ti/drivers/aesctrdrbg/AESCTRDRBGXX.h>
405
406AESCTRDRBGXX_Object aesctrdrbgXXObjects[CC1352P_2_LAUNCHXL_AESCTRDRBGCOUNT];
407
408const AESCTRDRBGXX_HWAttrs aesctrdrbgXXHWAttrs[CC1352P_2_LAUNCHXL_AESCTRDRBGCOUNT] = {
409 {
410 .aesctrIndex = CC1352P_2_LAUNCHXL_AESCTR0,
411 }
412};
413
414const AESCTRDRBG_Config AESCTRDRBG_config[CC1352P_2_LAUNCHXL_AESCTRDRBGCOUNT] = {
415 {
416 .object = &aesctrdrbgXXObjects[CC1352P_2_LAUNCHXL_AESCTRDRBG0],
417 .hwAttrs = &aesctrdrbgXXHWAttrs[CC1352P_2_LAUNCHXL_AESCTRDRBG0]
418 },
419};
420
421const uint_least8_t AESCTRDRBG_count = CC1352P_2_LAUNCHXL_AESCTRDRBGCOUNT;
422
423/*
424 * =============================== TRNG ===============================
425 */
426#include <ti/drivers/TRNG.h>
427#include <ti/drivers/trng/TRNGCC26XX.h>
428
429TRNGCC26XX_Object trngCC26XXObjects[CC1352P_2_LAUNCHXL_TRNGCOUNT];
430
431const TRNGCC26XX_HWAttrs trngCC26X2HWAttrs[CC1352P_2_LAUNCHXL_TRNGCOUNT] = {
432 {
433 .intPriority = ~0,
434 .swiPriority = 0,
435 .samplesPerCycle = 240000,
436 }
437};
438
439const TRNG_Config TRNG_config[CC1352P_2_LAUNCHXL_TRNGCOUNT] = {
440 {
441 .object = &trngCC26XXObjects[CC1352P_2_LAUNCHXL_TRNG0],
442 .hwAttrs = &trngCC26X2HWAttrs[CC1352P_2_LAUNCHXL_TRNG0]
443 },
444};
445
446const uint_least8_t TRNG_count = CC1352P_2_LAUNCHXL_TRNGCOUNT;
447
448/*
449 * =============================== GPIO ===============================
450 */
451#include <ti/drivers/GPIO.h>
452#include <ti/drivers/gpio/GPIOCC26XX.h>
453
454/*
455 * Array of Pin configurations
456 * NOTE: The order of the pin configurations must coincide with what was
457 * defined in CC1352P_2_LAUNCHXL.h
458 * NOTE: Pins not used for interrupts should be placed at the end of the
459 * array. Callback entries can be omitted from callbacks array to
460 * reduce memory usage.
461 */
462GPIO_PinConfig gpioPinConfigs[] = {
463 /* Input pins */
464 GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* Button 0 */
465 GPIOCC26XX_DIO_14 | GPIO_DO_NOT_CONFIG, /* Button 1 */
466
467 GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* CC1352P_2_LAUNCHXL_SPI_MASTER_READY */
468 GPIOCC26XX_DIO_21 | GPIO_DO_NOT_CONFIG, /* CC1352P_2_LAUNCHXL_SPI_SLAVE_READY */
469
470 /* Output pins */
471 GPIOCC26XX_DIO_07 | GPIO_DO_NOT_CONFIG, /* Green LED */
472 GPIOCC26XX_DIO_06 | GPIO_DO_NOT_CONFIG, /* Red LED */
473
474 /* SPI Flash CSN */
475 GPIOCC26XX_DIO_20 | GPIO_DO_NOT_CONFIG,
476
477 /* SD CS */
478 GPIOCC26XX_DIO_19 | GPIO_DO_NOT_CONFIG,
479};
480
481/*
482 * Array of callback function pointers
483 * NOTE: The order of the pin configurations must coincide with what was
484 * defined in CC1352P_LAUNCH.h
485 * NOTE: Pins not used for interrupts can be omitted from callbacks array to
486 * reduce memory usage (if placed at end of gpioPinConfigs array).
487 */
488GPIO_CallbackFxn gpioCallbackFunctions[] = {
489 NULL, /* Button 0 */
490 NULL, /* Button 1 */
491 NULL, /* CC1352P_2_LAUNCHXL_SPI_MASTER_READY */
492 NULL, /* CC1352P_2_LAUNCHXL_SPI_SLAVE_READY */
493};
494
495const GPIOCC26XX_Config GPIOCC26XX_config = {
496 .pinConfigs = (GPIO_PinConfig *)gpioPinConfigs,
497 .callbacks = (GPIO_CallbackFxn *)gpioCallbackFunctions,
498 .numberOfPinConfigs = CC1352P_2_LAUNCHXL_GPIOCOUNT,
499 .numberOfCallbacks = sizeof(gpioCallbackFunctions)/sizeof(GPIO_CallbackFxn),
500 .intPriority = (~0)
501};
502
503/*
504 * =============================== GPTimer ===============================
505 * Remove unused entries to reduce flash usage both in Board.c and Board.h
506 */
507#include <ti/drivers/timer/GPTimerCC26XX.h>
508
509GPTimerCC26XX_Object gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMERCOUNT];
510
511const GPTimerCC26XX_HWAttrs gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMERPARTSCOUNT] = {
512 { .baseAddr = GPT0_BASE, .intNum = INT_GPT0A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0A, },
513 { .baseAddr = GPT0_BASE, .intNum = INT_GPT0B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0B, },
514 { .baseAddr = GPT1_BASE, .intNum = INT_GPT1A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1A, },
515 { .baseAddr = GPT1_BASE, .intNum = INT_GPT1B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1B, },
516 { .baseAddr = GPT2_BASE, .intNum = INT_GPT2A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2A, },
517 { .baseAddr = GPT2_BASE, .intNum = INT_GPT2B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2B, },
518 { .baseAddr = GPT3_BASE, .intNum = INT_GPT3A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3A, },
519 { .baseAddr = GPT3_BASE, .intNum = INT_GPT3B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3B, },
520};
521
522const GPTimerCC26XX_Config GPTimerCC26XX_config[CC1352P_2_LAUNCHXL_GPTIMERPARTSCOUNT] = {
523 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER0], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER0A], GPT_A },
524 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER0], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER0B], GPT_B },
525 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER1], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER1A], GPT_A },
526 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER1], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER1B], GPT_B },
527 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER2], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER2A], GPT_A },
528 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER2], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER2B], GPT_B },
529 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER3], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER3A], GPT_A },
530 { &gptimerCC26XXObjects[CC1352P_2_LAUNCHXL_GPTIMER3], &gptimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_GPTIMER3B], GPT_B },
531};
532
533/*
534 * =============================== I2C ===============================
535*/
536#include <ti/drivers/I2C.h>
537#include <ti/drivers/i2c/I2CCC26XX.h>
538
539#if TI_I2C_CONF_ENABLE
540
541I2CCC26XX_Object i2cCC26xxObjects[CC1352P_2_LAUNCHXL_I2CCOUNT];
542
543const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[CC1352P_2_LAUNCHXL_I2CCOUNT] = {
544#if TI_I2C_CONF_I2C0_ENABLE
545 {
546 .baseAddr = I2C0_BASE,
547 .powerMngrId = PowerCC26XX_PERIPH_I2C0,
548 .intNum = INT_I2C_IRQ,
549 .intPriority = ~0,
550 .swiPriority = 0,
551 .sdaPin = CC1352P_2_LAUNCHXL_I2C0_SDA0,
552 .sclPin = CC1352P_2_LAUNCHXL_I2C0_SCL0,
553 },
554#endif
555};
556
557const I2C_Config I2C_config[CC1352P_2_LAUNCHXL_I2CCOUNT] = {
558#if TI_I2C_CONF_I2C0_ENABLE
559 {
560 .fxnTablePtr = &I2CCC26XX_fxnTable,
561 .object = &i2cCC26xxObjects[CC1352P_2_LAUNCHXL_I2C0],
562 .hwAttrs = &i2cCC26xxHWAttrs[CC1352P_2_LAUNCHXL_I2C0]
563 },
564#endif
565};
566
567const uint_least8_t I2C_count = CC1352P_2_LAUNCHXL_I2CCOUNT;
568
569#endif /* TI_I2C_CONF_ENABLE */
570
571/*
572 * =============================== I2S ===============================
573*/
574#include <ti/drivers/I2S.h>
575#include <ti/drivers/i2s/I2SCC26XX.h>
576
577I2SCC26XX_Object i2sCC26XXObjects[CC1352P_2_LAUNCHXL_I2SCOUNT];
578
579const I2SCC26XX_HWAttrs i2sCC26XXHWAttrs[CC1352P_2_LAUNCHXL_I2SCOUNT] = {
580 {
581 .pinSD1 = CC1352P_2_LAUNCHXL_I2S_ADI,
582 .pinSD0 = CC1352P_2_LAUNCHXL_I2S_ADO,
583 .pinSCK = CC1352P_2_LAUNCHXL_I2S_BCLK,
584 .pinMCLK = CC1352P_2_LAUNCHXL_I2S_MCLK,
585 .pinWS = CC1352P_2_LAUNCHXL_I2S_WCLK,
586 .intPriority = ~0,
587 }
588};
589
590const I2S_Config I2S_config[CC1352P_2_LAUNCHXL_I2SCOUNT] = {
591 {
592 .object = &i2sCC26XXObjects[CC1352P_2_LAUNCHXL_I2S0],
593 .hwAttrs = &i2sCC26XXHWAttrs[CC1352P_2_LAUNCHXL_I2S0]
594 },
595};
596
597const uint_least8_t I2S_count = CC1352P_2_LAUNCHXL_I2SCOUNT;
598
599/*
600 * =============================== NVS ===============================
601 */
602#include <ti/drivers/NVS.h>
603#include <ti/drivers/nvs/NVSSPI25X.h>
604#include <ti/drivers/nvs/NVSCC26XX.h>
605
606#define NVS_REGIONS_BASE 0x48000
607#define SECTORSIZE 0x2000
608#define REGIONSIZE (SECTORSIZE * 4)
609
610#if TI_NVS_CONF_ENABLE
611
612#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
613
614/*
615 * Reserve flash sectors for NVS driver use by placing an uninitialized byte
616 * array at the desired flash address.
617 */
618#if defined(__TI_COMPILER_VERSION__)
619
620/*
621 * Place uninitialized array at NVS_REGIONS_BASE
622 */
623#pragma LOCATION(flashBuf, NVS_REGIONS_BASE);
624#pragma NOINIT(flashBuf);
625static char flashBuf[REGIONSIZE];
626
627#elif defined(__IAR_SYSTEMS_ICC__)
628
629/*
630 * Place uninitialized array at NVS_REGIONS_BASE
631 */
632static __no_init char flashBuf[REGIONSIZE] @ NVS_REGIONS_BASE;
633
634#elif defined(__GNUC__)
635
636/*
637 * Place the flash buffers in the .nvs section created in the gcc linker file.
638 * The .nvs section enforces alignment on a sector boundary but may
639 * be placed anywhere in flash memory. If desired the .nvs section can be set
640 * to a fixed address by changing the following in the gcc linker file:
641 *
642 * .nvs (FIXED_FLASH_ADDR) (NOLOAD) : AT (FIXED_FLASH_ADDR) {
643 * *(.nvs)
644 * } > REGION_TEXT
645 */
646__attribute__ ((section (".nvs")))
647static char flashBuf[REGIONSIZE];
648
649#endif
650
651/* Allocate objects for NVS Internal Regions */
652NVSCC26XX_Object nvsCC26xxObjects[1];
653
654/* Hardware attributes for NVS Internal Regions */
655const NVSCC26XX_HWAttrs nvsCC26xxHWAttrs[1] = {
656 {
657 .regionBase = (void *)flashBuf,
658 .regionSize = REGIONSIZE,
659 },
660};
661
662#endif /* TI_NVS_CONF_NVS_INTERNAL_ENABLE */
663
664#if TI_NVS_CONF_NVS_EXTERNAL_ENABLE
665
666#define SPISECTORSIZE 0x1000
667#define SPIREGIONSIZE (SPISECTORSIZE * 32)
668#define VERIFYBUFSIZE 64
669
670static uint8_t verifyBuf[VERIFYBUFSIZE];
671
672/* Allocate objects for NVS External Regions */
673NVSSPI25X_Object nvsSPI25XObjects[1];
674
675/* Hardware attributes for NVS External Regions */
676const NVSSPI25X_HWAttrs nvsSPI25XHWAttrs[1] = {
677 {
678 .regionBaseOffset = 0,
679 .regionSize = SPIREGIONSIZE,
680 .sectorSize = SPISECTORSIZE,
681 .verifyBuf = verifyBuf,
682 .verifyBufSize = VERIFYBUFSIZE,
683 .spiHandle = NULL,
684 .spiIndex = 0,
685 .spiBitRate = 4000000,
686 .spiCsnGpioIndex = CC1352P_2_LAUNCHXL_GPIO_SPI_FLASH_CS,
687 .statusPollDelayUs = 100,
688 },
689};
690
691#endif /* TI_NVS_CONF_NVS_EXTERNAL_ENABLE */
692
693/* NVS Region index 0 and 1 refer to NVS and NVS SPI respectively */
694const NVS_Config NVS_config[CC1352P_2_LAUNCHXL_NVSCOUNT] = {
695#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
696 {
697 .fxnTablePtr = &NVSCC26XX_fxnTable,
698 .object = &nvsCC26xxObjects[0],
699 .hwAttrs = &nvsCC26xxHWAttrs[0],
700 },
701#endif
702#if TI_NVS_CONF_NVS_EXTERNAL_ENABLE
703 {
704 .fxnTablePtr = &NVSSPI25X_fxnTable,
705 .object = &nvsSPI25XObjects[0],
706 .hwAttrs = &nvsSPI25XHWAttrs[0],
707 },
708#endif
709};
710
711const uint_least8_t NVS_count = CC1352P_2_LAUNCHXL_NVSCOUNT;
712
713#endif /* TI_NVS_CONF_ENABLE */
714
715/*
716 * =============================== PIN ===============================
717 */
718#include <ti/drivers/PIN.h>
719#include <ti/drivers/pin/PINCC26XX.h>
720
721const PIN_Config BoardGpioInitTable[] = {
722
723 CC1352P_2_LAUNCHXL_PIN_RLED | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
724 CC1352P_2_LAUNCHXL_PIN_GLED | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
725 CC1352P_2_LAUNCHXL_PIN_BTN1 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
726 CC1352P_2_LAUNCHXL_PIN_BTN2 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
727 CC1352P_2_LAUNCHXL_SPI_FLASH_CS | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MIN, /* External flash chip select */
728 CC1352P_2_LAUNCHXL_UART0_RX | PIN_INPUT_EN | PIN_PULLDOWN, /* UART RX via debugger back channel */
729 CC1352P_2_LAUNCHXL_UART0_TX | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL, /* UART TX via debugger back channel */
730 CC1352P_2_LAUNCHXL_SPI0_MOSI | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master out - slave in */
731 CC1352P_2_LAUNCHXL_SPI0_MISO | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master in - slave out */
732 CC1352P_2_LAUNCHXL_SPI0_CLK | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI clock */
733 CC1352P_2_LAUNCHXL_DIO28_RF_24GHZ | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* Path disabled */
734 CC1352P_2_LAUNCHXL_DIO29_RF_HIGH_PA | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* Path disabled */
735 CC1352P_2_LAUNCHXL_DIO30_RF_SUB1GHZ | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* Path disabled */
736 PIN_TERMINATE
737};
738
739const PINCC26XX_HWAttrs PINCC26XX_hwAttrs = {
740 .intPriority = ~0,
741 .swiPriority = 0
742};
743
744/*
745 * =============================== Power ===============================
746 */
747#include <ti/drivers/Power.h>
748#include <ti/drivers/power/PowerCC26X2.h>
749#include "clock-arch.h"
750
751const PowerCC26X2_Config PowerCC26X2_config = {
752 .policyInitFxn = NULL,
753 .policyFxn = &clock_arch_standby_policy,
754 .calibrateFxn = &PowerCC26XX_calibrate,
755 .enablePolicy = true,
756 .calibrateRCOSC_LF = true,
757 .calibrateRCOSC_HF = true,
758};
759
760/*
761 * =============================== PWM ===============================
762 * Remove unused entries to reduce flash usage both in Board.c and Board.h
763 */
764#include <ti/drivers/PWM.h>
765#include <ti/drivers/pwm/PWMTimerCC26XX.h>
766
767PWMTimerCC26XX_Object pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWMCOUNT];
768
769const PWMTimerCC26XX_HwAttrs pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWMCOUNT] = {
770 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN0, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER0A },
771 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN1, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER0B },
772 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN2, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER1A },
773 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN3, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER1B },
774 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN4, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER2A },
775 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN5, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER2B },
776 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN6, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER3A },
777 { .pwmPin = CC1352P_2_LAUNCHXL_PWMPIN7, .gpTimerUnit = CC1352P_2_LAUNCHXL_GPTIMER3B },
778};
779
780const PWM_Config PWM_config[CC1352P_2_LAUNCHXL_PWMCOUNT] = {
781 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM0], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM0] },
782 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM1], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM1] },
783 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM2], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM2] },
784 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM3], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM3] },
785 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM4], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM4] },
786 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM5], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM5] },
787 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM6], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM6] },
788 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352P_2_LAUNCHXL_PWM7], &pwmtimerCC26xxHWAttrs[CC1352P_2_LAUNCHXL_PWM7] },
789};
790
791const uint_least8_t PWM_count = CC1352P_2_LAUNCHXL_PWMCOUNT;
792
793/*
794 * =============================== RF Driver ===============================
795 */
796#include <ti/drivers/rf/RF.h>
797
798/*
799 * Board-specific callback function to set the correct antenna path.
800 *
801 * This function is called by the RF driver on global driver events.
802 * It contains a default implementation to set the correct antenna path.
803 * This function is defined in the file CC1352P_2_LAUNCHXL_fxns.c
804 */
805extern void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void* arg);
806
807const RFCC26XX_HWAttrsV2 RFCC26XX_hwAttrs = {
808 .hwiPriority = ~0, /* Lowest HWI priority */
809 .swiPriority = 0, /* Lowest SWI priority */
810 .xoscHfAlwaysNeeded = true, /* Keep XOSC dependency while in standby */
811
812 /* Register the board specific callback */
813 .globalCallback = &rfDriverCallback,
814
815 /* Subscribe the callback to both events */
816 .globalEventMask = RF_GlobalEventRadioSetup | RF_GlobalEventRadioPowerDown
817};
818
819/*
820 * =============================== SD ===============================
821 */
822#include <ti/drivers/SD.h>
823#include <ti/drivers/sd/SDSPI.h>
824
825#if TI_SD_CONF_ENABLE
826
827#if !(TI_SPI_CONF_SPI0_ENABLE)
828#error "SD driver requires SPI0 enabled"
829#endif
830
831SDSPI_Object sdspiObjects[CC1352P_2_LAUNCHXL_SDCOUNT];
832
833const SDSPI_HWAttrs sdspiHWAttrs[CC1352P_2_LAUNCHXL_SDCOUNT] = {
834 {
835 .spiIndex = CC1352P_2_LAUNCHXL_SPI0,
836 .spiCsGpioIndex = CC1352P_2_LAUNCHXL_GPIO_DIO_19
837 }
838};
839
840const SD_Config SD_config[CC1352P_2_LAUNCHXL_SDCOUNT] = {
841 {
842 .fxnTablePtr = &SDSPI_fxnTable,
843 .object = &sdspiObjects[CC1352P_2_LAUNCHXL_SDSPI0],
844 .hwAttrs = &sdspiHWAttrs[CC1352P_2_LAUNCHXL_SDSPI0]
845 },
846};
847
848const uint_least8_t SD_count = CC1352P_2_LAUNCHXL_SDCOUNT;
849
850#endif /* TI_SD_CONF_ENABLE */
851
852/*
853 * =============================== SPI DMA ===============================
854 */
855#include <ti/drivers/SPI.h>
856#include <ti/drivers/spi/SPICC26X2DMA.h>
857
858#if TI_SPI_CONF_ENABLE
859
860SPICC26X2DMA_Object spiCC26X2DMAObjects[CC1352P_2_LAUNCHXL_SPICOUNT];
861
862/*
863 * NOTE: The SPI instances below can be used by the SD driver to communicate
864 * with a SD card via SPI. The 'defaultTxBufValue' fields below are set to 0xFF
865 * to satisfy the SDSPI driver requirement.
866 */
867const SPICC26X2DMA_HWAttrs spiCC26X2DMAHWAttrs[CC1352P_2_LAUNCHXL_SPICOUNT] = {
868#if TI_SPI_CONF_SPI0_ENABLE
869 {
870 .baseAddr = SSI0_BASE,
871 .intNum = INT_SSI0_COMB,
872 .intPriority = ~0,
873 .swiPriority = 0,
874 .powerMngrId = PowerCC26XX_PERIPH_SSI0,
875 .defaultTxBufValue = 0xFF,
876 .rxChannelBitMask = 1<<UDMA_CHAN_SSI0_RX,
877 .txChannelBitMask = 1<<UDMA_CHAN_SSI0_TX,
878 .mosiPin = CC1352P_2_LAUNCHXL_SPI0_MOSI,
879 .misoPin = CC1352P_2_LAUNCHXL_SPI0_MISO,
880 .clkPin = CC1352P_2_LAUNCHXL_SPI0_CLK,
881 .csnPin = CC1352P_2_LAUNCHXL_SPI0_CSN,
882 .minDmaTransferSize = 10
883 },
884#endif
885#if TI_SPI_CONF_SPI1_ENABLE
886 {
887 .baseAddr = SSI1_BASE,
888 .intNum = INT_SSI1_COMB,
889 .intPriority = ~0,
890 .swiPriority = 0,
891 .powerMngrId = PowerCC26XX_PERIPH_SSI1,
892 .defaultTxBufValue = 0xFF,
893 .rxChannelBitMask = 1<<UDMA_CHAN_SSI1_RX,
894 .txChannelBitMask = 1<<UDMA_CHAN_SSI1_TX,
895 .mosiPin = CC1352P_2_LAUNCHXL_SPI1_MOSI,
896 .misoPin = CC1352P_2_LAUNCHXL_SPI1_MISO,
897 .clkPin = CC1352P_2_LAUNCHXL_SPI1_CLK,
898 .csnPin = CC1352P_2_LAUNCHXL_SPI1_CSN,
899 .minDmaTransferSize = 10
900 },
901#endif
902};
903
904const SPI_Config SPI_config[CC1352P_2_LAUNCHXL_SPICOUNT] = {
905#if TI_SPI_CONF_SPI0_ENABLE
906 {
907 .fxnTablePtr = &SPICC26X2DMA_fxnTable,
908 .object = &spiCC26X2DMAObjects[CC1352P_2_LAUNCHXL_SPI0],
909 .hwAttrs = &spiCC26X2DMAHWAttrs[CC1352P_2_LAUNCHXL_SPI0]
910 },
911#endif
912#if TI_SPI_CONF_SPI1_ENABLE
913 {
914 .fxnTablePtr = &SPICC26X2DMA_fxnTable,
915 .object = &spiCC26X2DMAObjects[CC1352P_2_LAUNCHXL_SPI1],
916 .hwAttrs = &spiCC26X2DMAHWAttrs[CC1352P_2_LAUNCHXL_SPI1]
917 },
918#endif
919};
920
921const uint_least8_t SPI_count = CC1352P_2_LAUNCHXL_SPICOUNT;
922
923#endif /* TI_SPI_CONF_ENABLE */
924
925/*
926 * =============================== UART ===============================
927 */
928#include <ti/drivers/UART.h>
929#include <ti/drivers/uart/UARTCC26XX.h>
930
931#if TI_UART_CONF_ENABLE
932
933UARTCC26XX_Object uartCC26XXObjects[CC1352P_2_LAUNCHXL_UARTCOUNT];
934
935uint8_t uartCC26XXRingBuffer[CC1352P_2_LAUNCHXL_UARTCOUNT][32];
936
937const UARTCC26XX_HWAttrsV2 uartCC26XXHWAttrs[CC1352P_2_LAUNCHXL_UARTCOUNT] = {
938#if TI_UART_CONF_UART0_ENABLE
939 {
940 .baseAddr = UART0_BASE,
941 .powerMngrId = PowerCC26XX_PERIPH_UART0,
942 .intNum = INT_UART0_COMB,
943 .intPriority = ~0,
944 .swiPriority = 0,
945 .txPin = CC1352P_2_LAUNCHXL_UART0_TX,
946 .rxPin = CC1352P_2_LAUNCHXL_UART0_RX,
947 .ctsPin = PIN_UNASSIGNED,
948 .rtsPin = PIN_UNASSIGNED,
949 .ringBufPtr = uartCC26XXRingBuffer[CC1352P_2_LAUNCHXL_UART0],
950 .ringBufSize = sizeof(uartCC26XXRingBuffer[CC1352P_2_LAUNCHXL_UART0]),
951 .txIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_1_8,
952 .rxIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_4_8,
953 .errorFxn = NULL
954 },
955#endif
956#if TI_UART_CONF_UART1_ENABLE
957 {
958 .baseAddr = UART1_BASE,
959 .powerMngrId = PowerCC26X2_PERIPH_UART1,
960 .intNum = INT_UART1_COMB,
961 .intPriority = ~0,
962 .swiPriority = 0,
963 .txPin = CC1352P_2_LAUNCHXL_UART1_TX,
964 .rxPin = CC1352P_2_LAUNCHXL_UART1_RX,
965 .ctsPin = PIN_UNASSIGNED,
966 .rtsPin = PIN_UNASSIGNED,
967 .ringBufPtr = uartCC26XXRingBuffer[CC1352P_2_LAUNCHXL_UART1],
968 .ringBufSize = sizeof(uartCC26XXRingBuffer[CC1352P_2_LAUNCHXL_UART1]),
969 .txIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_1_8,
970 .rxIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_4_8,
971 .errorFxn = NULL
972 },
973#endif
974};
975
976const UART_Config UART_config[CC1352P_2_LAUNCHXL_UARTCOUNT] = {
977#if TI_UART_CONF_UART0_ENABLE
978 {
979 .fxnTablePtr = &UARTCC26XX_fxnTable,
980 .object = &uartCC26XXObjects[CC1352P_2_LAUNCHXL_UART0],
981 .hwAttrs = &uartCC26XXHWAttrs[CC1352P_2_LAUNCHXL_UART0]
982 },
983#endif
984#if TI_UART_CONF_UART1_ENABLE
985 {
986 .fxnTablePtr = &UARTCC26XX_fxnTable,
987 .object = &uartCC26XXObjects[CC1352P_2_LAUNCHXL_UART1],
988 .hwAttrs = &uartCC26XXHWAttrs[CC1352P_2_LAUNCHXL_UART1]
989 },
990#endif
991};
992
993const uint_least8_t UART_count = CC1352P_2_LAUNCHXL_UARTCOUNT;
994
995#endif /* TI_UART_CONF_ENABLE */
996
997/*
998 * =============================== UDMA ===============================
999 */
1000#include <ti/drivers/dma/UDMACC26XX.h>
1001
1002UDMACC26XX_Object udmaObjects[CC1352P_2_LAUNCHXL_UDMACOUNT];
1003
1004const UDMACC26XX_HWAttrs udmaHWAttrs[CC1352P_2_LAUNCHXL_UDMACOUNT] = {
1005 {
1006 .baseAddr = UDMA0_BASE,
1007 .powerMngrId = PowerCC26XX_PERIPH_UDMA,
1008 .intNum = INT_DMA_ERR,
1009 .intPriority = ~0
1010 }
1011};
1012
1013const UDMACC26XX_Config UDMACC26XX_config[CC1352P_2_LAUNCHXL_UDMACOUNT] = {
1014 {
1015 .object = &udmaObjects[CC1352P_2_LAUNCHXL_UDMA0],
1016 .hwAttrs = &udmaHWAttrs[CC1352P_2_LAUNCHXL_UDMA0]
1017 },
1018};
1019
1020
1021
1022/*
1023 * =============================== Watchdog ===============================
1024 */
1025#include <ti/drivers/Watchdog.h>
1026#include <ti/drivers/watchdog/WatchdogCC26XX.h>
1027
1028WatchdogCC26XX_Object watchdogCC26XXObjects[CC1352P_2_LAUNCHXL_WATCHDOGCOUNT];
1029
1030const WatchdogCC26XX_HWAttrs watchdogCC26XXHWAttrs[CC1352P_2_LAUNCHXL_WATCHDOGCOUNT] = {
1031 {
1032 .baseAddr = WDT_BASE,
1033 .reloadValue = 1000 /* Reload value in milliseconds */
1034 },
1035};
1036
1037const Watchdog_Config Watchdog_config[CC1352P_2_LAUNCHXL_WATCHDOGCOUNT] = {
1038 {
1039 .fxnTablePtr = &WatchdogCC26XX_fxnTable,
1040 .object = &watchdogCC26XXObjects[CC1352P_2_LAUNCHXL_WATCHDOG0],
1041 .hwAttrs = &watchdogCC26XXHWAttrs[CC1352P_2_LAUNCHXL_WATCHDOG0]
1042 },
1043};
1044
1045const uint_least8_t Watchdog_count = CC1352P_2_LAUNCHXL_WATCHDOGCOUNT;
1046
1047/*
1048 * Board-specific initialization function to disable external flash.
1049 * This function is defined in the file CC1352P_2_LAUNCHXL_fxns.c
1050 */
1051extern void Board_initHook(void);
1052
1053/*
1054 * ======== CC1352P_2_LAUNCHXL_initGeneral ========
1055 */
1057{
1058 Power_init();
1059
1060 if (PIN_init(BoardGpioInitTable) != PIN_SUCCESS) {
1061 /* Error with PIN_init */
1062 while (1);
1063 }
1064
1065 /* Perform board-specific initialization */
1066 Board_initHook();
1067}
1068
1069/*
1070 * ======== Board_init ========
1071 */
1072void Board_init(void)
1073{
1075}
===========================================================================
void CC1352P_2_LAUNCHXL_initGeneral(void)
Initialize the general board specific settings.
Header file for the CC13xx/CC26xx clock implementation.
void clock_arch_standby_policy(void)
Called by the Power driver when dropping to some low-power state.
Definition: clock-arch.c:184
#define SSI1_BASE
Base address for SSI1.
Definition: ssi.h:59
#define SSI0_BASE
Base address for SSI0.
Definition: ssi.h:58