develop/_api/scsi__sense_8h_source.html

/* Sense keys */

#define SCSI_SENSE_KEY_NO_SENSE         0x0

#define SCSI_SENSE_KEY_RECOVERED_ERROR  0x1

#define SCSI_SENSE_KEY_NOT_READY        0x2

#define SCSI_SENSE_KEY_MEDIUM_ERROR     0x3

#define SCSI_SENSE_KEY_HARDWARE_ERROR   0x4

#define SCSI_SENSE_KEY_ILLEGAL_REQUEST  0x5

#define SCSI_SENSE_KEY_UNIT_ATTENTION   0x6

#define SCSI_SENSE_KEY_DATA_PROTECT     0x7

#define SCSI_SENSE_KEY_BLANK_CHECK      0x8

#define SCSI_SENSE_KEY_VENDOR_SPECIFIC  0x9

#define SCSI_SENSE_KEY_COPY_ABORTED     0xA

#define SCSI_SENSE_KEY_ABORTED_COMMAND  0xB

#define SCSI_SENSE_KEY_VOLUME_OVERFLOW  0xD

#define SCSI_SENSE_KEY_MISCOMPARE       0xE


/* Additional sense codes */

#define SCSI_ASC_NO_SENSE 0x0000

#define SCSI_ASC_FILEMARK_DETECTED 0x0001

#define SCSI_ASC_END_OF_MEDIUM_DETECTED 0x0002

#define SCSI_ASC_BEGINNING_OF_MEDIUM_DETECTED 0x0004

#define SCSI_ASC_END_OF_DATA_DETECTED 0x0005

#define SCSI_ASC_PERIPHERAL_DEVICE_WRITE_FAULT 0x0300

#define SCSI_ASC_NO_WRITE_CURRENT 0x0301

#define SCSI_ASC_EXCESSIVE_WRITE_ERRORS 0x0302

#define SCSI_ASC_NOT_READY_CAUSE_NOT_REPORTABLE 0x0400

#define SCSI_ASC_IN_PROCESS_OF_BECOMING_READY 0x0401

#define SCSI_ASC_NOT_READY_INITIALIZING_COMMAND_REQUIRED 0x0402

#define SCSI_ASC_NOT_READY_MANUAL_INTERVENTION_REQUIRED 0x0403

#define SCSI_ASC_NOT_READY_FORMAT_IN_PROGRESS 0x0404

#define SCSI_ASC_COMMUNICATION_FAILURE 0x0800

#define SCSI_ASC_COMMUNICATION_TIME_OUT 0x0801

#define SCSI_ASC_COMMUNICATION_PARITY_ERROR 0x0802

#define SCSI_ASC_TRACK_FOLLOWING_ERROR 0x0900

#define SCSI_ASC_ERROR_LOG_OVERFLOW 0x0a00

#define SCSI_ASC_WRITE_ERROR 0x0c00

#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x1100

#define SCSI_ASC_READ_RETRIES_EXHAUSTED 0x1101

#define SCSI_ASC_ERROR_TOO_LONG_TO_CORRECT 0x1102

#define SCSI_ASC_MULTIPLE_READ_ERRORS 0x1103

#define SCSI_ASC_INCOMPLETE_BLOCK_READ 0x1108

#define SCSI_ASC_NO_GAP_FOUND 0x1109

#define SCSI_ASC_MISCORRECTED_ERROR 0x110a

#define SCSI_ASC_RECORDED_ENTITY_NOT_FOUND 0x1400

#define SCSI_ASC_RECORD_NOT_FOUND 0x1401

#define SCSI_ASC_FILEMARK_NOT_FOUND 0x1402

#define SCSI_ASC_END_OF_DATA_NOT_FOUND 0x1403

#define SCSI_ASC_BLOCK_SEQUENCE_ERROR 0x1404

#define SCSI_ASC_RANDOM_POSITIONING_ERROR 0x1500

#define SCSI_ASC_MECHANICAL_POSITIONING_ERROR 0x1501

#define SCSI_ASC_POSITIONING_ERROR_DETECTED_BY_READ_OF_MEDIUM 0x1502

#define SCSI_ASC_RECOVERED_DATA_WITH_NO_ERROR_CORRECTION_APPLIED 0x1700

#define SCSI_ASC_RECOVERED_DATA_WITH_RETRIES 0x1701

#define SCSI_ASC_RECOVERED_DATA_WITH_POSITIVE_HEAD_OFFSET 0x1702

#define SCSI_ASC_RECOVERED_DATA_WITH_NEGATIVE_HEAD_OFFSET 0x1703

#define SCSI_ASC_RECOVERED_DATA_WITH_ERROR_CORRECTION_APPLIED 0x1800

#define SCSI_ASC_DEFECTLIST_ERROR 0x1900

#define SCSI_ASC_PARAMETER_LIST_LENGTH_ERROR 0x1a00

#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x2000

#define SCSI_ASC_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x2100

#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x2400

#define SCSI_ASC_LOGICAL_UNIT_NOT_SUPPORTED 0x2500

#define SCSI_ASC_INVALID_FIELD_IN_PARAMETER_LIST 0x2600

#define SCSI_ASC_PARAMETER_NOT_SUPPORTED 0x2601

#define SCSI_ASC_PARAMETER_VALUE_INVALID 0x2602

#define SCSI_ASC_THRESHOLD_PARAMETERS_NOT_SUPPORTED 0x2603

#define SCSI_ASC_WRITE_PROTECTED 0x2700

#define SCSI_ASC_NOT_READY_TO_READY_TRANSITION 0x2800

#define SCSI_ASC_PARAMETERS_CHANGED 0x2a00

#define SCSI_ASC_MODE_PARAMETERS_CHANGED 0x2a01

#define SCSI_ASC_OVERWRITE_ERROR_ON_UPDATE_IN_PLACE 0x2d00

#define SCSI_ASC_POWERON_RESET_OR_DEVICE_RESET_OCCURRED 0x2900

#define SCSI_ASC_INCOMPATIBLE_MEDIUM_INSTALLED 0x3000

#define SCSI_ASC_CANNOT_READ_MEDIUM_UNKNOWN_FORMAT 0x3001

#define SCSI_ASC_CANNOT_READ_MEDIUM_INCOMPATIBLE_FORMAT 0x3002

#define SCSI_ASC_CLEANING_CARTRIDGE_INSTALLED 0x3003

#define SCSI_ASC_MEDIUM_FORMAT_CORRUPTED 0x3100

#define SCSI_ASC_TAPE_LENGTH_ERROR 0x3300

#define SCSI_ASC_ROUNDED_PARAMETER 0x3700

#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x3900

#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3a00

#define SCSI_ASC_SEQUENTIAL_POSITIONING_ERROR 0x3b00

#define SCSI_ASC_TAPE_POSITION_ERROR_AT_BEGINNING_OF_MEDIUM 0x3b01

#define SCSI_ASC_TAPE_POSITION_ERROR_AT_END_OF_MEDIUM 0x3b02

#define SCSI_ASC_REPOSITION_ERROR 0x3b08

#define SCSI_ASC_NOT_SELF_CONFIGURED_YET 0x3e00

#define SCSI_ASC_OPERATING_CONDITIONS_HAVE_CHANGED 0x3f00

#define SCSI_ASC_MICROCODE_HAS_BEEN_CHANGED 0x3f01

#define SCSI_ASC_INQUIRY_DATA_HAS_CHANGED 0x3f03

/* 40 NN DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FF H) */

#define SCSI_ASC_INTERNAL_FAILURE 0x4400

#define SCSI_ASC_UNSUCCESSFUL_DEVICE_RESET 0x4600

#define SCSI_ASC_FAILED_SELF_CONFIGURATION 0x4c00

#define SCSI_ASC_OVERLAPPED_COMMANDS_ATTEMPTED 0x4e00

#define SCSI_ASC_WRITE_APPEND_ERROR 0x5000

#define SCSI_ASC_WRITE_APPEND_POSITION_ERROR 0x5001

#define SCSI_ASC_POSITION_ERROR_RELATED_TO_TIMING 0x5002

#define SCSI_ASC_ERASE_FAILURE 0x5100

#define SCSI_ASC_CARTRIDGE_FAULT 0x5200

#define SCSI_ASC_MEDIA_LOAD_EJECT_FAILED 0x5300

#define SCSI_ASC_UNLOAD_TAPE_FAILURE 0x5301

#define SCSI_ASC_MEDIUM_REMOVAL_PREVENTED 0x5302

#define SCSI_ASC_OPERATOR_REQUEST_OR_STATE_CHANGE_INPUT 0x5a00

#define SCSI_ASC_OPERATOR_MEDIUM_REMOVAL_REQUEST 0x5a01

#define SCSI_ASC_OPERATOR_SELECTED_WRITE_PROTECT 0x5a01

#define SCSI_ASC_OPERATOR_SELECTED_WRITE_PERMIT 0x5a03

#define SCSI_ASC_LOG_EXCEPTION 0x5b00

#define SCSI_ASC_THRESHOLD_CONDITION_MET 0x5b01

#define SCSI_ASC_LOG_COUNTER_AT_MAXIMUM 0x5b02

#define SCSI_ASC_LOG_LIST_CODES_EXHAUSTED 0x5b03

/*

70 NN DECOMPRES S ION EXCEP TION SHORT ALGORITHM ID OF NN

71 00 DECOMPRES S ION EXCEP TION LONG ALGORITHM ID

*/