CC1350 Sensortag Peripherals

Files
file	board.h
	Header file with definitions related to the I/O connections on the TI Sensortag.
void	board_init (void)
	Board specific iniatialisation.

Buzzer configuration
#define	BOARD_IOID_BUZZER   IOID_21
	Buzzer Pin.
#define	BOARD_IOID_SDA   IOID_5
	I2C IOID mappings.
#define	BOARD_IOID_SCL   IOID_6
	Interface 0 SCL: All sensors bar MPU.
#define	BOARD_IOID_SDA_HP   IOID_8
	Interface 1 SDA: MPU.
#define	BOARD_IOID_SCL_HP   IOID_9
	Interface 1 SCL: MPU.
#define	BOARD_IOID_MPU_INT   IOID_7
	MPU IOID mappings.
#define	BOARD_IOID_AUDIOFS_TDO   IOID_16
	Board devpack IOID mappings (LCD etc.)
#define	BOARD_IOID_TMP_RDY   IOID_11
	TMP Sensor.
#define	BOARD_IOID_MIC_POWER   IOID_13
	Digital Microphone.
#define	BOARD_BUTTON_HAL_INDEX_KEY_LEFT   0x00
	Board indices for the button HAL.
#define	CCFG_CONF_BL_PIN_NUMBER   IOID_UNUSED
	ROM bootloader configuration.

Detailed Description

Defines related to the CC1350 Sensortag

This file provides connectivity information on LEDs, Buttons, UART and other peripherals

This file can be used as the basis to configure other boards using the CC13xx code as their basis.

This file is not meant to be modified by the user.

Macro Definition Documentation

BOARD_BUTTON_HAL_INDEX_KEY_LEFT

#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT   0x00

Board indices for the button HAL.

Those values are not meant to be modified by the user

Definition at line 246 of file board.h.

BOARD_IOID_AUDIOFS_TDO

#define BOARD_IOID_AUDIOFS_TDO   IOID_16

Board devpack IOID mappings (LCD etc.)

Those values are not meant to be modified by the user

Definition at line 182 of file board.h.

BOARD_IOID_MIC_POWER

#define BOARD_IOID_MIC_POWER   IOID_13

Digital Microphone.

Those values are not meant to be modified by the user

Definition at line 209 of file board.h.

BOARD_IOID_MPU_INT

#define BOARD_IOID_MPU_INT   IOID_7

MPU IOID mappings.

Those values are not meant to be modified by the user

Definition at line 170 of file board.h.

Referenced by configure().

BOARD_IOID_SDA

#define BOARD_IOID_SDA   IOID_5

I2C IOID mappings.

Those values are not meant to be modified by the user Interface 0 SDA: All sensors bar MPU

Definition at line 158 of file board.h.

BOARD_IOID_TMP_RDY

#define BOARD_IOID_TMP_RDY   IOID_11

TMP Sensor.

Those values are not meant to be modified by the user

Definition at line 200 of file board.h.

Referenced by configure().

CCFG_CONF_BL_PIN_NUMBER

#define CCFG_CONF_BL_PIN_NUMBER   IOID_UNUSED

ROM bootloader configuration.

Sensortags do not support the bootloader

Definition at line 257 of file board.h.