Contiki-NG
Loading...
Searching...
No Matches
CC1350DK_7XD.c
1/*
2 * Copyright (c) 2016-2019, Texas Instruments Incorporated
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * * Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 *
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * * Neither the name of Texas Instruments Incorporated nor the names of
17 * its contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/*
34 * ====================== CC1350DK_7XD.c ===================================
35 * This file is responsible for setting up the board specific items for the
36 * CC1350DK_7XD board.
37 */
38
39#include <stdbool.h>
40#include <stddef.h>
41#include <stdint.h>
42
43#include <ti/devices/DeviceFamily.h>
44#include DeviceFamily_constructPath(driverlib/ioc.h)
45#include DeviceFamily_constructPath(driverlib/udma.h)
46#include DeviceFamily_constructPath(inc/hw_ints.h)
47#include DeviceFamily_constructPath(inc/hw_memmap.h)
48
49#include "CC1350DK_7XD.h"
50
51/*
52 * =============================== ADCBuf ===============================
53 */
54#include <ti/drivers/ADCBuf.h>
55#include <ti/drivers/adcbuf/ADCBufCC26XX.h>
56
57ADCBufCC26XX_Object adcBufCC26xxObjects[CC1350DK_7XD_ADCBUFCOUNT];
58
59/*
60 * This table converts a virtual adc channel into a dio and internal analogue
61 * input signal. This table is necessary for the functioning of the adcBuf
62 * driver. Comment out unused entries to save flash. Dio and internal signal
63 * pairs are hardwired. Do not remap them in the table. You may reorder entire
64 * entries. The mapping of dio and internal signals is package dependent.
65 */
66const ADCBufCC26XX_AdcChannelLutEntry ADCBufCC26XX_adcChannelLut[CC1350DK_7XD_ADCBUF0CHANNELCOUNT] = {
67 {CC1350DK_7XD_ALS_OUT, ADC_COMPB_IN_AUXIO7},
68 {PIN_UNASSIGNED, ADC_COMPB_IN_DCOUPL},
69 {PIN_UNASSIGNED, ADC_COMPB_IN_VSS},
70 {PIN_UNASSIGNED, ADC_COMPB_IN_VDDS},
71};
72
73const ADCBufCC26XX_HWAttrs adcBufCC26xxHWAttrs[CC1350DK_7XD_ADCBUFCOUNT] = {
74 {
75 .intPriority = ~0,
76 .swiPriority = 0,
77 .adcChannelLut = ADCBufCC26XX_adcChannelLut,
78 }
79};
80
81const ADCBuf_Config ADCBuf_config[CC1350DK_7XD_ADCBUFCOUNT] = {
82 {
83 &ADCBufCC26XX_fxnTable,
84 &adcBufCC26xxObjects[CC1350DK_7XD_ADCBUF0],
85 &adcBufCC26xxHWAttrs[CC1350DK_7XD_ADCBUF0]
86 },
87};
88
89const uint_least8_t ADCBuf_count = CC1350DK_7XD_ADCBUFCOUNT;
90
91/*
92 * =============================== ADC ===============================
93 */
94#include <ti/drivers/ADC.h>
95#include <ti/drivers/adc/ADCCC26XX.h>
96
97ADCCC26XX_Object adcCC26xxObjects[CC1350DK_7XD_ADCCOUNT];
98
99const ADCCC26XX_HWAttrs adcCC26xxHWAttrs[CC1350DK_7XD_ADCCOUNT] = {
100 {
101 .adcDIO = CC1350DK_7XD_DIO23_ANALOG,
102 .adcCompBInput = ADC_COMPB_IN_AUXIO7,
103 .refSource = ADCCC26XX_FIXED_REFERENCE,
104 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
105 .inputScalingEnabled = true,
106 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
107 .returnAdjustedVal = false
108 },
109 {
110 .adcDIO = PIN_UNASSIGNED,
111 .adcCompBInput = ADC_COMPB_IN_DCOUPL,
112 .refSource = ADCCC26XX_FIXED_REFERENCE,
113 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
114 .inputScalingEnabled = true,
115 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
116 .returnAdjustedVal = false
117 },
118 {
119 .adcDIO = PIN_UNASSIGNED,
120 .adcCompBInput = ADC_COMPB_IN_VSS,
121 .refSource = ADCCC26XX_FIXED_REFERENCE,
122 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
123 .inputScalingEnabled = true,
124 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
125 .returnAdjustedVal = false
126 },
127 {
128 .adcDIO = PIN_UNASSIGNED,
129 .adcCompBInput = ADC_COMPB_IN_VDDS,
130 .refSource = ADCCC26XX_FIXED_REFERENCE,
131 .samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
132 .inputScalingEnabled = true,
133 .triggerSource = ADCCC26XX_TRIGGER_MANUAL,
134 .returnAdjustedVal = false
135 }
136};
137
138const ADC_Config ADC_config[CC1350DK_7XD_ADCCOUNT] = {
139 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1350DK_7XD_ADCALS], &adcCC26xxHWAttrs[CC1350DK_7XD_ADCALS]},
140 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1350DK_7XD_ADCDCOUPL], &adcCC26xxHWAttrs[CC1350DK_7XD_ADCDCOUPL]},
141 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1350DK_7XD_ADCVSS], &adcCC26xxHWAttrs[CC1350DK_7XD_ADCVSS]},
142 {&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1350DK_7XD_ADCVDDS], &adcCC26xxHWAttrs[CC1350DK_7XD_ADCVDDS]},
143};
144
145const uint_least8_t ADC_count = CC1350DK_7XD_ADCCOUNT;
146
147/*
148 * =============================== Crypto ===============================
149 */
150#include <ti/drivers/crypto/CryptoCC26XX.h>
151
152CryptoCC26XX_Object cryptoCC26XXObjects[CC1350DK_7XD_CRYPTOCOUNT];
153
154const CryptoCC26XX_HWAttrs cryptoCC26XXHWAttrs[CC1350DK_7XD_CRYPTOCOUNT] = {
155 {
156 .baseAddr = CRYPTO_BASE,
157 .powerMngrId = PowerCC26XX_PERIPH_CRYPTO,
158 .intNum = INT_CRYPTO_RESULT_AVAIL_IRQ,
159 .intPriority = ~0,
160 }
161};
162
163const CryptoCC26XX_Config CryptoCC26XX_config[CC1350DK_7XD_CRYPTOCOUNT] = {
164 {
165 .object = &cryptoCC26XXObjects[CC1350DK_7XD_CRYPTO0],
166 .hwAttrs = &cryptoCC26XXHWAttrs[CC1350DK_7XD_CRYPTO0]
167 },
168};
169
170/*
171 * =============================== AESCCM ===============================
172 */
173#include <ti/drivers/AESCCM.h>
174#include <ti/drivers/aesccm/AESCCMCC26XX.h>
175
176AESCCMCC26XX_Object aesccmCC26XXObjects[CC1350DK_7XD_AESCCMCOUNT];
177
178const AESCCMCC26XX_HWAttrs aesccmCC26XXHWAttrs[CC1350DK_7XD_AESCCMCOUNT] = {
179 {
180 .intPriority = ~0,
181 }
182};
183
184const AESCCM_Config AESCCM_config[CC1350DK_7XD_AESCCMCOUNT] = {
185 {
186 .object = &aesccmCC26XXObjects[CC1350DK_7XD_AESCCM0],
187 .hwAttrs = &aesccmCC26XXHWAttrs[CC1350DK_7XD_AESCCM0]
188 },
189};
190
191const uint_least8_t AESCCM_count = CC1350DK_7XD_AESCCMCOUNT;
192
193
194/*
195 * =============================== AESGCM ===============================
196 */
197#include <ti/drivers/AESGCM.h>
198#include <ti/drivers/aesgcm/AESGCMCC26XX.h>
199
200AESGCMCC26XX_Object aesgcmCC26XXObjects[CC1350DK_7XD_AESGCMCOUNT];
201
202const AESGCMCC26XX_HWAttrs aesgcmCC26XXHWAttrs[CC1350DK_7XD_AESGCMCOUNT] = {
203 {
204 .intPriority = ~0,
205 }
206};
207
208const AESGCM_Config AESGCM_config[CC1350DK_7XD_AESGCMCOUNT] = {
209 {
210 .object = &aesgcmCC26XXObjects[CC1350DK_7XD_AESGCM0],
211 .hwAttrs = &aesgcmCC26XXHWAttrs[CC1350DK_7XD_AESGCM0]
212 },
213};
214
215const uint_least8_t AESGCM_count = CC1350DK_7XD_AESGCMCOUNT;
216
217/*
218 * =============================== AESCBC ===============================
219 */
220#include <ti/drivers/AESCBC.h>
221#include <ti/drivers/aescbc/AESCBCCC26XX.h>
222
223AESCBCCC26XX_Object aescbcCC26XXObjects[CC1350DK_7XD_AESCBCCOUNT];
224
225const AESCBCCC26XX_HWAttrs aescbcCC26XXHWAttrs[CC1350DK_7XD_AESCBCCOUNT] = {
226 {
227 .intPriority = ~0,
228 }
229};
230
231const AESCBC_Config AESCBC_config[CC1350DK_7XD_AESCBCCOUNT] = {
232 {
233 .object = &aescbcCC26XXObjects[CC1350DK_7XD_AESCBC0],
234 .hwAttrs = &aescbcCC26XXHWAttrs[CC1350DK_7XD_AESCBC0]
235 },
236};
237
238const uint_least8_t AESCBC_count = CC1350DK_7XD_AESCBCCOUNT;
239
240/*
241 * =============================== AESCTR ===============================
242 */
243#include <ti/drivers/AESCTR.h>
244#include <ti/drivers/aesctr/AESCTRCC26XX.h>
245
246AESCTRCC26XX_Object aesctrCC26XXObjects[CC1350DK_7XD_AESCTRCOUNT];
247
248const AESCTRCC26XX_HWAttrs aesctrCC26XXHWAttrs[CC1350DK_7XD_AESCTRCOUNT] = {
249 {
250 .intPriority = ~0,
251 }
252};
253
254const AESCTR_Config AESCTR_config[CC1350DK_7XD_AESCTRCOUNT] = {
255 {
256 .object = &aesctrCC26XXObjects[CC1350DK_7XD_AESCTR0],
257 .hwAttrs = &aesctrCC26XXHWAttrs[CC1350DK_7XD_AESCTR0]
258 },
259};
260
261const uint_least8_t AESCTR_count = CC1350DK_7XD_AESCTRCOUNT;
262
263/*
264 * =============================== AESECB ===============================
265 */
266#include <ti/drivers/AESECB.h>
267#include <ti/drivers/aesecb/AESECBCC26XX.h>
268
269AESECBCC26XX_Object aesecbCC26XXObjects[CC1350DK_7XD_AESECBCOUNT];
270
271const AESECBCC26XX_HWAttrs aesecbCC26XXHWAttrs[CC1350DK_7XD_AESECBCOUNT] = {
272 {
273 .intPriority = ~0,
274 }
275};
276
277const AESECB_Config AESECB_config[CC1350DK_7XD_AESECBCOUNT] = {
278 {
279 .object = &aesecbCC26XXObjects[CC1350DK_7XD_AESECB0],
280 .hwAttrs = &aesecbCC26XXHWAttrs[CC1350DK_7XD_AESECB0]
281 },
282};
283
284const uint_least8_t AESECB_count = CC1350DK_7XD_AESECBCOUNT;
285
286/*
287 * =============================== AESCTRDRBG ===============================
288 */
289#include <ti/drivers/AESCTRDRBG.h>
290#include <ti/drivers/aesctrdrbg/AESCTRDRBGXX.h>
291
292AESCTRDRBGXX_Object aesctrdrbgXXObjects[CC1350DK_7XD_AESCTRDRBGCOUNT];
293
294const AESCTRDRBGXX_HWAttrs aesctrdrbgXXHWAttrs[CC1350DK_7XD_AESCTRDRBGCOUNT] = {
295 {
296 .aesctrIndex = CC1350DK_7XD_AESCTR0,
297 }
298};
299
300const AESCTRDRBG_Config AESCTRDRBG_config[CC1350DK_7XD_AESCTRDRBGCOUNT] = {
301 {
302 .object = &aesctrdrbgXXObjects[CC1350DK_7XD_AESCTRDRBG0],
303 .hwAttrs = &aesctrdrbgXXHWAttrs[CC1350DK_7XD_AESCTRDRBG0]
304 },
305};
306
307const uint_least8_t AESCTRDRBG_count = CC1350DK_7XD_AESCTRDRBGCOUNT;
308
309/*
310 * =============================== TRNG ===============================
311 */
312#include <ti/drivers/TRNG.h>
313#include <ti/drivers/trng/TRNGCC26XX.h>
314
315TRNGCC26XX_Object trngCC26XXObjects[CC1350DK_7XD_TRNGCOUNT];
316
317const TRNGCC26XX_HWAttrs trngCC26X2HWAttrs[CC1350DK_7XD_TRNGCOUNT] = {
318 {
319 .intPriority = ~0,
320 .swiPriority = 0,
321 .samplesPerCycle = 240000,
322 }
323};
324
325const TRNG_Config TRNG_config[CC1350DK_7XD_TRNGCOUNT] = {
326 {
327 .object = &trngCC26XXObjects[CC1350DK_7XD_TRNG0],
328 .hwAttrs = &trngCC26X2HWAttrs[CC1350DK_7XD_TRNG0]
329 },
330};
331
332const uint_least8_t TRNG_count = CC1350DK_7XD_TRNGCOUNT;
333
334/*
335 * =============================== GPIO ===============================
336 */
337#include <ti/drivers/GPIO.h>
338#include <ti/drivers/gpio/GPIOCC26XX.h>
339
340/*
341 * Array of Pin configurations
342 * NOTE: The order of the pin configurations must coincide with what was
343 * defined in CC1350DK_7XD.h
344 * NOTE: Pins not used for interrupts should be placed at the end of the
345 * array. Callback entries can be omitted from callbacks array to
346 * reduce memory usage.
347 */
348GPIO_PinConfig gpioPinConfigs[] = {
349 /* Input pins */
350 GPIOCC26XX_DIO_11 | GPIO_DO_NOT_CONFIG, /* Key Select */
351 GPIOCC26XX_DIO_19 | GPIO_DO_NOT_CONFIG, /* Key Up */
352 GPIOCC26XX_DIO_12 | GPIO_DO_NOT_CONFIG, /* Key Down */
353 GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* Key Left */
354 GPIOCC26XX_DIO_18 | GPIO_DO_NOT_CONFIG, /* Key Right */
355
356 GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* CC1350DK_7XD_SPI_MASTER_READY */
357 GPIOCC26XX_DIO_21 | GPIO_DO_NOT_CONFIG, /* CC1350DK_7XD_SPI_SLAVE_READY */
358
359 /* Output pins */
360 GPIOCC26XX_DIO_25 | GPIO_DO_NOT_CONFIG, /* LED 1 */
361 GPIOCC26XX_DIO_27 | GPIO_DO_NOT_CONFIG, /* LED 2 */
362 GPIOCC26XX_DIO_07 | GPIO_DO_NOT_CONFIG, /* LED 3 */
363 GPIOCC26XX_DIO_06 | GPIO_DO_NOT_CONFIG, /* LED 4 */
364
365 /* SDCARD */
366 GPIOCC26XX_DIO_30 | GPIO_DO_NOT_CONFIG, /* SPI chip select */
367
368 /* Accelerometer */
369 GPIOCC26XX_DIO_24 | GPIO_DO_NOT_CONFIG, /* SPI chip select */
370};
371
372/*
373 * Array of callback function pointers
374 * NOTE: The order of the pin configurations must coincide with what was
375 * defined in CC1350DK_7XD.h
376 * NOTE: Pins not used for interrupts can be omitted from callbacks array to
377 * reduce memory usage (if placed at end of gpioPinConfigs array).
378 */
379GPIO_CallbackFxn gpioCallbackFunctions[] = {
380 NULL, /* Button 0 */
381 NULL, /* Button 1 */
382 NULL, /* CC1350DK_7XD_SPI_MASTER_READY */
383 NULL, /* CC1350DK_7XD_SPI_SLAVE_READY */
384};
385
386const GPIOCC26XX_Config GPIOCC26XX_config = {
387 .pinConfigs = (GPIO_PinConfig *)gpioPinConfigs,
388 .callbacks = (GPIO_CallbackFxn *)gpioCallbackFunctions,
389 .numberOfPinConfigs = CC1350DK_7XD_GPIOCOUNT,
390 .numberOfCallbacks = sizeof(gpioCallbackFunctions)/sizeof(GPIO_CallbackFxn),
391 .intPriority = (~0)
392};
393
394/*
395 * =============================== GPTimer ===============================
396 * Remove unused entries to reduce flash usage both in Board.c and Board.h
397 */
398#include <ti/drivers/timer/GPTimerCC26XX.h>
399
400GPTimerCC26XX_Object gptimerCC26XXObjects[CC1350DK_7XD_GPTIMERCOUNT];
401
402const GPTimerCC26XX_HWAttrs gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMERPARTSCOUNT] = {
403 { .baseAddr = GPT0_BASE, .intNum = INT_GPT0A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0A, },
404 { .baseAddr = GPT0_BASE, .intNum = INT_GPT0B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0B, },
405 { .baseAddr = GPT1_BASE, .intNum = INT_GPT1A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1A, },
406 { .baseAddr = GPT1_BASE, .intNum = INT_GPT1B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1B, },
407 { .baseAddr = GPT2_BASE, .intNum = INT_GPT2A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2A, },
408 { .baseAddr = GPT2_BASE, .intNum = INT_GPT2B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2B, },
409 { .baseAddr = GPT3_BASE, .intNum = INT_GPT3A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3A, },
410 { .baseAddr = GPT3_BASE, .intNum = INT_GPT3B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3B, },
411};
412
413const GPTimerCC26XX_Config GPTimerCC26XX_config[CC1350DK_7XD_GPTIMERPARTSCOUNT] = {
414 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER0], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER0A], GPT_A },
415 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER0], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER0B], GPT_B },
416 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER1], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER1A], GPT_A },
417 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER1], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER1B], GPT_B },
418 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER2], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER2A], GPT_A },
419 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER2], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER2B], GPT_B },
420 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER3], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER3A], GPT_A },
421 { &gptimerCC26XXObjects[CC1350DK_7XD_GPTIMER3], &gptimerCC26xxHWAttrs[CC1350DK_7XD_GPTIMER3B], GPT_B },
422};
423
424/*
425 * =============================== I2C ===============================
426*/
427#include <ti/drivers/I2C.h>
428#include <ti/drivers/i2c/I2CCC26XX.h>
429
430#if TI_I2C_CONF_ENABLE
431
432I2CCC26XX_Object i2cCC26xxObjects[CC1350DK_7XD_I2CCOUNT];
433
434const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[CC1350DK_7XD_I2CCOUNT] = {
435#if TI_I2C_CONF_I2C0_ENABLE
436 {
437 .baseAddr = I2C0_BASE,
438 .powerMngrId = PowerCC26XX_PERIPH_I2C0,
439 .intNum = INT_I2C_IRQ,
440 .intPriority = ~0,
441 .swiPriority = 0,
442 .sdaPin = CC1350DK_7XD_I2C0_SDA0,
443 .sclPin = CC1350DK_7XD_I2C0_SCL0,
444 },
445#endif
446};
447
448const I2C_Config I2C_config[CC1350DK_7XD_I2CCOUNT] = {
449#if TI_I2C_CONF_I2C0_ENABLE
450 {
451 .fxnTablePtr = &I2CCC26XX_fxnTable,
452 .object = &i2cCC26xxObjects[CC1350DK_7XD_I2C0],
453 .hwAttrs = &i2cCC26xxHWAttrs[CC1350DK_7XD_I2C0]
454 },
455#endif
456};
457
458const uint_least8_t I2C_count = CC1350DK_7XD_I2CCOUNT;
459
460#endif /* TI_I2C_CONF_ENABLE */
461
462/*
463 * =============================== I2S ===============================
464*/
465#include <ti/drivers/I2S.h>
466#include <ti/drivers/i2s/I2SCC26XX.h>
467
468I2SCC26XX_Object i2sCC26XXObjects[CC1350DK_7XD_I2SCOUNT];
469
470const I2SCC26XX_HWAttrs i2sCC26XXHWAttrs[CC1350DK_7XD_I2SCOUNT] = {
471 {
472 .pinSD1 = CC1350DK_7XD_I2S_ADI,
473 .pinSD0 = CC1350DK_7XD_I2S_ADO,
474 .pinSCK = CC1350DK_7XD_I2S_BCLK,
475 .pinMCLK = CC1350DK_7XD_I2S_MCLK,
476 .pinWS = CC1350DK_7XD_I2S_WCLK,
477 .intPriority = ~0,
478 }
479};
480
481const I2S_Config I2S_config[CC1350DK_7XD_I2SCOUNT] = {
482 {
483 .object = &i2sCC26XXObjects[CC1350DK_7XD_I2S0],
484 .hwAttrs = &i2sCC26XXHWAttrs[CC1350DK_7XD_I2S0]
485 },
486};
487
488const uint_least8_t I2S_count = CC1350DK_7XD_I2SCOUNT;
489
490/*
491 * =============================== NVS ===============================
492 */
493#include <ti/drivers/NVS.h>
494#include <ti/drivers/nvs/NVSSPI25X.h>
495#include <ti/drivers/nvs/NVSCC26XX.h>
496
497#define NVS_REGIONS_BASE 0x1A000
498#define SECTORSIZE 0x1000
499#define REGIONSIZE (SECTORSIZE * 4)
500
501#if TI_NVS_CONF_ENABLE
502
503#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
504/*
505 * Reserve flash sectors for NVS driver use by placing an uninitialized byte
506 * array at the desired flash address.
507 */
508#if defined(__TI_COMPILER_VERSION__)
509
510/*
511 * Place uninitialized array at NVS_REGIONS_BASE
512 */
513#pragma LOCATION(flashBuf, NVS_REGIONS_BASE);
514#pragma NOINIT(flashBuf);
515static char flashBuf[REGIONSIZE];
516
517#elif defined(__IAR_SYSTEMS_ICC__)
518
519/*
520 * Place uninitialized array at NVS_REGIONS_BASE
521 */
522static __no_init char flashBuf[REGIONSIZE] @ NVS_REGIONS_BASE;
523
524#elif defined(__GNUC__)
525
526/*
527 * Place the flash buffers in the .nvs section created in the gcc linker file.
528 * The .nvs section enforces alignment on a sector boundary but may
529 * be placed anywhere in flash memory. If desired the .nvs section can be set
530 * to a fixed address by changing the following in the gcc linker file:
531 *
532 * .nvs (FIXED_FLASH_ADDR) (NOLOAD) : AT (FIXED_FLASH_ADDR) {
533 * *(.nvs)
534 * } > REGION_TEXT
535 */
536__attribute__ ((section (".nvs")))
537static char flashBuf[REGIONSIZE];
538
539#endif
540
541/* Allocate objects for NVS Internal Regions */
542NVSCC26XX_Object nvsCC26xxObjects[1];
543
544/* Hardware attributes for NVS Internal Regions */
545const NVSCC26XX_HWAttrs nvsCC26xxHWAttrs[1] = {
546 {
547 .regionBase = (void *)flashBuf,
548 .regionSize = REGIONSIZE,
549 },
550};
551
552#endif /* TI_NVS_CONF_NVS_INTERNAL_ENABLE */
553
554/* NVS Region index 0 and 1 refer to NVS and NVS SPI respectively */
555const NVS_Config NVS_config[CC1350DK_7XD_NVSCOUNT] = {
556#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
557 {
558 .fxnTablePtr = &NVSCC26XX_fxnTable,
559 .object = &nvsCC26xxObjects[0],
560 .hwAttrs = &nvsCC26xxHWAttrs[0],
561 },
562#endif
563};
564
565const uint_least8_t NVS_count = CC1350DK_7XD_NVSCOUNT;
566
567#endif /* TI_NVS_CONF_ENABLE */
568
569/*
570 * =============================== PIN ===============================
571 */
572#include <ti/drivers/PIN.h>
573#include <ti/drivers/pin/PINCC26XX.h>
574
575const PIN_Config BoardGpioInitTable[] = {
576
577 CC1350DK_7XD_PIN_LED1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
578 CC1350DK_7XD_PIN_LED2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
579 CC1350DK_7XD_PIN_LED3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
580 CC1350DK_7XD_PIN_LED4 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
581 CC1350DK_7XD_PIN_KEY_SELECT | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
582 CC1350DK_7XD_PIN_KEY_UP | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
583 CC1350DK_7XD_PIN_KEY_DOWN | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
584 CC1350DK_7XD_PIN_KEY_LEFT | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
585 CC1350DK_7XD_PIN_KEY_UP | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
586 CC1350DK_7XD_SPI_SDCARD_CS | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MIN, /* External flash chip select */
587 CC1350DK_7XD_ACC_CS | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MIN, /* External flash chip select */
588 CC1350DK_7XD_UART_RX | PIN_INPUT_EN | PIN_PULLDOWN, /* UART RX via debugger back channel */
589 CC1350DK_7XD_UART_TX | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL, /* UART TX via debugger back channel */
590 CC1350DK_7XD_SPI0_MOSI | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master out - slave in */
591 CC1350DK_7XD_SPI0_MISO | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master in - slave out */
592 CC1350DK_7XD_SPI0_CLK | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI clock */
593
594 PIN_TERMINATE
595};
596
597const PINCC26XX_HWAttrs PINCC26XX_hwAttrs = {
598 .intPriority = ~0,
599 .swiPriority = 0
600};
601
602/*
603 * =============================== Power ===============================
604 */
605#include <ti/drivers/Power.h>
606#include <ti/drivers/power/PowerCC26XX.h>
607#include "clock-arch.h"
608
609const PowerCC26XX_Config PowerCC26XX_config = {
610 .policyInitFxn = NULL,
611 .policyFxn = &clock_arch_standby_policy,
612 .calibrateFxn = &PowerCC26XX_calibrate,
613 .enablePolicy = true,
614 .calibrateRCOSC_LF = true,
615 .calibrateRCOSC_HF = true,
616};
617
618/*
619 * =============================== PWM ===============================
620 * Remove unused entries to reduce flash usage both in Board.c and Board.h
621 */
622#include <ti/drivers/PWM.h>
623#include <ti/drivers/pwm/PWMTimerCC26XX.h>
624
625PWMTimerCC26XX_Object pwmtimerCC26xxObjects[CC1350DK_7XD_PWMCOUNT];
626
627const PWMTimerCC26XX_HwAttrs pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWMCOUNT] = {
628 { .pwmPin = CC1350DK_7XD_PWMPIN0, .gpTimerUnit = CC1350DK_7XD_GPTIMER0A },
629 { .pwmPin = CC1350DK_7XD_PWMPIN1, .gpTimerUnit = CC1350DK_7XD_GPTIMER0B },
630 { .pwmPin = CC1350DK_7XD_PWMPIN2, .gpTimerUnit = CC1350DK_7XD_GPTIMER1A },
631 { .pwmPin = CC1350DK_7XD_PWMPIN3, .gpTimerUnit = CC1350DK_7XD_GPTIMER1B },
632 { .pwmPin = CC1350DK_7XD_PWMPIN4, .gpTimerUnit = CC1350DK_7XD_GPTIMER2A },
633 { .pwmPin = CC1350DK_7XD_PWMPIN5, .gpTimerUnit = CC1350DK_7XD_GPTIMER2B },
634 { .pwmPin = CC1350DK_7XD_PWMPIN6, .gpTimerUnit = CC1350DK_7XD_GPTIMER3A },
635 { .pwmPin = CC1350DK_7XD_PWMPIN7, .gpTimerUnit = CC1350DK_7XD_GPTIMER3B },
636};
637
638const PWM_Config PWM_config[CC1350DK_7XD_PWMCOUNT] = {
639 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM0], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM0] },
640 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM1], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM1] },
641 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM2], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM2] },
642 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM3], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM3] },
643 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM4], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM4] },
644 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM5], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM5] },
645 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM6], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM6] },
646 { &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1350DK_7XD_PWM7], &pwmtimerCC26xxHWAttrs[CC1350DK_7XD_PWM7] },
647};
648
649const uint_least8_t PWM_count = CC1350DK_7XD_PWMCOUNT;
650
651/*
652 * =============================== RF Driver ===============================
653 */
654#include <ti/drivers/rf/RF.h>
655
656const RFCC26XX_HWAttrsV2 RFCC26XX_hwAttrs = {
657 .hwiPriority = ~0, /* Lowest HWI priority */
658 .swiPriority = 0, /* Lowest SWI priority */
659 .xoscHfAlwaysNeeded = true, /* Keep XOSC dependency while in stanby */
660 .globalCallback = NULL, /* No board specific callback */
661 .globalEventMask = 0 /* No events subscribed to */
662};
663
664/*
665 * =============================== SD ===============================
666 */
667#include <ti/drivers/SD.h>
668#include <ti/drivers/sd/SDSPI.h>
669
670#if TI_SD_CONF_ENABLE
671
672#if !(TI_SPI_CONF_SPI0_ENABLE)
673#error "SD driver requires SPI0 enabled"
674#endif
675
676SDSPI_Object sdspiObjects[CC1350DK_7XD_SDCOUNT];
677
678const SDSPI_HWAttrs sdspiHWAttrs[CC1350DK_7XD_SDCOUNT] = {
679 {
680 .spiIndex = CC1350DK_7XD_SPI0,
681 .spiCsGpioIndex = CC1350DK_7XD_SDSPI_CS
682 }
683};
684
685const SD_Config SD_config[CC1350DK_7XD_SDCOUNT] = {
686 {
687 .fxnTablePtr = &SDSPI_fxnTable,
688 .object = &sdspiObjects[CC1350DK_7XD_SDSPI0],
689 .hwAttrs = &sdspiHWAttrs[CC1350DK_7XD_SDSPI0]
690 },
691};
692
693const uint_least8_t SD_count = CC1350DK_7XD_SDCOUNT;
694
695#endif /* TI_SD_CONF_ENABLE */
696
697/*
698 * =============================== SPI DMA ===============================
699 */
700#include <ti/drivers/SPI.h>
701#include <ti/drivers/spi/SPICC26XXDMA.h>
702
703#if TI_SPI_CONF_ENABLE
704
705SPICC26XXDMA_Object spiCC26XXDMAObjects[CC1350DK_7XD_SPICOUNT];
706
707/*
708 * NOTE: The SPI instances below can be used by the SD driver to communicate
709 * with a SD card via SPI. The 'defaultTxBufValue' fields below are set to 0xFF
710 * to satisfy the SDSPI driver requirement.
711 */
712const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[CC1350DK_7XD_SPICOUNT] = {
713#if TI_SPI_CONF_SPI0_ENABLE
714 {
715 .baseAddr = SSI0_BASE,
716 .intNum = INT_SSI0_COMB,
717 .intPriority = ~0,
718 .swiPriority = 0,
719 .powerMngrId = PowerCC26XX_PERIPH_SSI0,
720 .defaultTxBufValue = 0xFF,
721 .rxChannelBitMask = 1<<UDMA_CHAN_SSI0_RX,
722 .txChannelBitMask = 1<<UDMA_CHAN_SSI0_TX,
723 .mosiPin = CC1350DK_7XD_SPI0_MOSI,
724 .misoPin = CC1350DK_7XD_SPI0_MISO,
725 .clkPin = CC1350DK_7XD_SPI0_CLK,
726 .csnPin = CC1350DK_7XD_SPI0_CSN,
727 .minDmaTransferSize = 10
728 },
729#endif
730#if TI_SPI_CONF_SPI1_ENABLE
731 {
732 .baseAddr = SSI1_BASE,
733 .intNum = INT_SSI1_COMB,
734 .intPriority = ~0,
735 .swiPriority = 0,
736 .powerMngrId = PowerCC26XX_PERIPH_SSI1,
737 .defaultTxBufValue = 0xFF,
738 .rxChannelBitMask = 1<<UDMA_CHAN_SSI1_RX,
739 .txChannelBitMask = 1<<UDMA_CHAN_SSI1_TX,
740 .mosiPin = CC1350DK_7XD_SPI1_MOSI,
741 .misoPin = CC1350DK_7XD_SPI1_MISO,
742 .clkPin = CC1350DK_7XD_SPI1_CLK,
743 .csnPin = CC1350DK_7XD_SPI1_CSN,
744 .minDmaTransferSize = 10
745 },
746#endif
747};
748
749const SPI_Config SPI_config[CC1350DK_7XD_SPICOUNT] = {
750#if TI_SPI_CONF_SPI0_ENABLE
751 {
752 .fxnTablePtr = &SPICC26XXDMA_fxnTable,
753 .object = &spiCC26XXDMAObjects[CC1350DK_7XD_SPI0],
754 .hwAttrs = &spiCC26XXDMAHWAttrs[CC1350DK_7XD_SPI0]
755 },
756#endif
757#if TI_SPI_CONF_SPI1_ENABLE
758 {
759 .fxnTablePtr = &SPICC26XXDMA_fxnTable,
760 .object = &spiCC26XXDMAObjects[CC1350DK_7XD_SPI1],
761 .hwAttrs = &spiCC26XXDMAHWAttrs[CC1350DK_7XD_SPI1]
762 },
763#endif
764};
765
766const uint_least8_t SPI_count = CC1350DK_7XD_SPICOUNT;
767
768#endif /* TI_SPI_CONF_ENABLE */
769
770/*
771 * =============================== UART ===============================
772 */
773#include <ti/drivers/UART.h>
774#include <ti/drivers/uart/UARTCC26XX.h>
775
776#if TI_UART_CONF_ENABLE
777
778UARTCC26XX_Object uartCC26XXObjects[CC1350DK_7XD_UARTCOUNT];
779
780uint8_t uartCC26XXRingBuffer[CC1350DK_7XD_UARTCOUNT][32];
781
782const UARTCC26XX_HWAttrsV2 uartCC26XXHWAttrs[CC1350DK_7XD_UARTCOUNT] = {
783#if TI_UART_CONF_UART0_ENABLE
784 {
785 .baseAddr = UART0_BASE,
786 .powerMngrId = PowerCC26XX_PERIPH_UART0,
787 .intNum = INT_UART0_COMB,
788 .intPriority = ~0,
789 .swiPriority = 0,
790 .txPin = CC1350DK_7XD_UART_TX,
791 .rxPin = CC1350DK_7XD_UART_RX,
792 .ctsPin = PIN_UNASSIGNED,
793 .rtsPin = PIN_UNASSIGNED,
794 .ringBufPtr = uartCC26XXRingBuffer[CC1350DK_7XD_UART0],
795 .ringBufSize = sizeof(uartCC26XXRingBuffer[CC1350DK_7XD_UART0]),
796 .txIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_1_8,
797 .rxIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_4_8,
798 .errorFxn = NULL
799 },
800#endif
801};
802
803const UART_Config UART_config[CC1350DK_7XD_UARTCOUNT] = {
804#if TI_UART_CONF_UART0_ENABLE
805 {
806 .fxnTablePtr = &UARTCC26XX_fxnTable,
807 .object = &uartCC26XXObjects[CC1350DK_7XD_UART0],
808 .hwAttrs = &uartCC26XXHWAttrs[CC1350DK_7XD_UART0]
809 },
810#endif
811};
812
813const uint_least8_t UART_count = CC1350DK_7XD_UARTCOUNT;
814
815#endif /* TI_UART_CONF_ENABLE */
816
817/*
818 * =============================== UDMA ===============================
819 */
820#include <ti/drivers/dma/UDMACC26XX.h>
821
822UDMACC26XX_Object udmaObjects[CC1350DK_7XD_UDMACOUNT];
823
824const UDMACC26XX_HWAttrs udmaHWAttrs[CC1350DK_7XD_UDMACOUNT] = {
825 {
826 .baseAddr = UDMA0_BASE,
827 .powerMngrId = PowerCC26XX_PERIPH_UDMA,
828 .intNum = INT_DMA_ERR,
829 .intPriority = ~0
830 }
831};
832
833const UDMACC26XX_Config UDMACC26XX_config[CC1350DK_7XD_UDMACOUNT] = {
834 {
835 .object = &udmaObjects[CC1350DK_7XD_UDMA0],
836 .hwAttrs = &udmaHWAttrs[CC1350DK_7XD_UDMA0]
837 },
838};
839
840
841
842/*
843 * =============================== Watchdog ===============================
844 */
845#include <ti/drivers/Watchdog.h>
846#include <ti/drivers/watchdog/WatchdogCC26XX.h>
847
848WatchdogCC26XX_Object watchdogCC26XXObjects[CC1350DK_7XD_WATCHDOGCOUNT];
849
850const WatchdogCC26XX_HWAttrs watchdogCC26XXHWAttrs[CC1350DK_7XD_WATCHDOGCOUNT] = {
851 {
852 .baseAddr = WDT_BASE,
853 .reloadValue = 1000 /* Reload value in milliseconds */
854 },
855};
856
857const Watchdog_Config Watchdog_config[CC1350DK_7XD_WATCHDOGCOUNT] = {
858 {
859 .fxnTablePtr = &WatchdogCC26XX_fxnTable,
860 .object = &watchdogCC26XXObjects[CC1350DK_7XD_WATCHDOG0],
861 .hwAttrs = &watchdogCC26XXHWAttrs[CC1350DK_7XD_WATCHDOG0]
862 },
863};
864
865const uint_least8_t Watchdog_count = CC1350DK_7XD_WATCHDOGCOUNT;
866
867/*
868 * Board-specific initialization function to disable external flash.
869 * This function is defined in the file CC1350DK_7XD_fxns.c
870 */
871extern void Board_initHook(void);
872
873/*
874 * ======== CC1350DK_7XD_initGeneral ========
875 */
876void CC1350DK_7XD_initGeneral(void)
877{
878 Power_init();
879
880 if (PIN_init(BoardGpioInitTable) != PIN_SUCCESS) {
881 /* Error with PIN_init */
882 while (1);
883 }
884
885 /* Perform board-specific initialization */
886 Board_initHook();
887}
888
889/*
890 * ======== Board_init ========
891 */
892void Board_init(void)
893{
894 CC1350DK_7XD_initGeneral();
895}
============================================================================
Header file for the CC13xx/CC26xx clock implementation.
void clock_arch_standby_policy(void)
Called by the Power driver when dropping to some low-power state.
Definition clock-arch.c:184
#define SSI1_BASE
Base address for SSI1.
Definition ssi.h:59
#define SSI0_BASE
Base address for SSI0.
Definition ssi.h:58